The Ornamental Cheshire Cat is now available below! I've printed him at 13.5cm which makes him slightly taller than the mickey model. He also has no thin or fine areas so he should print fine on either resin or FDM printers.
RESIN
45 DEGREE ANGLE
DENS...
2023-07-16 18:43:25 +0000 UTC View Post
Sorry for the slight delay on this one, the patterns turned out to be a little tricky but he's now all finished and ready to download below. The test print ran smoothly and he stands without an issue, I've printed him at 13.5cm which makes him slightly taller than the mickey model. He also has no...
2023-07-15 02:04:17 +0000 UTC View Post
This was such a breeze to pattern which makes a nice change, it was a bit tedious towards the end but overall I love the look of the patterns and I think the model looks awesome, I'm so excited to paint him and see how he turns out.
The model is all done and the ornamental test print ...
2023-07-12 21:32:01 +0000 UTC View Post
Mischievous and unpredictable in nature, the Cheshire Cat acts as a guide for Alice during her adventures in Wonderland, but also takes pleasure in causing her trouble. He can appear and disappear at will and is always seen with a permanent smile on his face.
For the model ...
2023-07-11 04:31:03 +0000 UTC View Post
The Tea Cup sculpt is now available to download below! I printed mine in resin at 12cm tall which makes it a lovely size for a subtle shelf or table decoration. The glasses bird and drink me label are both printable separately and can be attached to anywhere on the model with superglue or a piece...
2023-07-11 04:30:32 +0000 UTC View Post
This month its Alice's Anniversary and what better way to celebrate than with a tea party! So we'll be starting off the month with the one and only Cheshire Cat as our first character model, with a couple of tea themed extras to go alongside him. I'll be making a 'this way-that way' mug tree and ...
2023-07-07 13:29:08 +0000 UTC View Post
In honour of Pride month our next character model was Simba with his fabulous leaf mane, now available to download below.
I've been itching to start our Lion pride for a while and who better to start off with than the future king of pride rock, I printed him in Gold P...
2023-07-07 03:30:18 +0000 UTC View Post
The ornamental version of Simba is now available to download below! I did originally pattern the whole back half of his leaves but they ended up looking too cluttered so I decided to keep them blank instead.
The test print again ran smoothly so other than his whiskers he shouldn't have any ...
2023-07-04 09:17:00 +0000 UTC View Post
The first version of Simba is now available to download below! The test print ran smoothly so other than his whiskers he shouldn't have any issues printing on either resin or FDM. I've included both a solid and hollowed version to ensure no pockets of resin form within the leaves. I printed him a...
2023-07-02 13:37:35 +0000 UTC View Post
Just a quick sneak peak of the Ornamental model so far, if I get a successful test print he should be up on the page in the morning. I can't wait to see this one printed he's looking awesome so far!
Thanks,
Harley
2023-06-30 01:00:45 +0000 UTC
View Post
A character that needs no introduction, Simba is the main character of The Lion King who is destined to rule over the Pride Lands as King.
For the model pose I've decided to make the scene where he sticks his head through the leaves and gets a leaf mane like in the bottom l...
2023-06-26 17:19:21 +0000 UTC View Post
A little bit of a change to our planned schedule, I haven't been able to make the advanced model I had planned this month, so since it's Pride month, who better than Simba as our next character model instead! I'll also have a couple of little extras to go alongside him, starting with this lovely ...
2023-06-26 00:38:58 +0000 UTC View Post
This month with the release of the live action I had lots of goodies out on the page for fans of the little mermaid. We started the month by adding the adorable Flounder to the collection, alongside Ariels Dinglehopper, Snarfblat and Thingamabob. We then added the next Magical Item to the page wi...
2023-06-26 00:37:59 +0000 UTC View Post
The final addition to our little mermaid month is Ursula's cauldron, now available to download below. Attached are the cauldron base for the waterball and Flounders coral base to go inside. The glass waterball itself can be purchased 2023-06-25 19:05:52 +0000 UTC View Post
Ursula's soul garden is now available to download below!
The base and souls are all printable separately and can be printed in either resin or FDM, I printed the base in white PLA and the souls in resin. To make the coloured sand for the garden just mix together some ...
2023-06-23 19:10:22 +0000 UTC View Post
Ursula's necklace and Earring set is now available to download below!
I printed the shell necklace in two halves using minimal supports and powered it using LED's, which are battery powered and can be bought pretty cheaply on Amazon or ebay. The shell itself is really thin in order for the ...
2023-06-23 00:23:02 +0000 UTC View Post
Our next character model out this month was of Ursula's sinister spies, Flotsam and Jetsam. As Disney Henchmen go I really love these two, they're dark and mysterious and add a really eerie tone to the film, they're also competent minions which makes a nice change and I LOVE the creepy way they t...
2023-06-20 00:08:16 +0000 UTC View Post
Another successful test print later and Ornamental Flotsam & Jetsam are now available to download below! There's a nice flat spot at the bottom for a drain hole and they don't really have any thin or fine areas other than their teeth so there shouldn't be any issues printing on FDM either. 2023-06-16 09:17:01 +0000 UTC View Post
One successful test print later Flotsam & Jetsam are now available to download below! its quite a big model so I've sized it at 12 cm which makes it a little shorter than our Mickey figure. I'm really impressed with the print and I think this might be one of my new favourites!
The...
2023-06-12 13:03:09 +0000 UTC View Post
Just a quick photo update of the finished ornamental model. I went with sharper patterns this time around to fit with their villainish appearance and left their fins blank to create a border running through the model, which separates the patterns really nicely. I think it came out looking really ...
2023-06-10 20:53:24 +0000 UTC View Post
Flotsam and Jetsam are a pair of sinister, green moray eels who serve as loyal minions to the Sea Witch Ursula. Despite her amorality, the eels are deeply loved by Ursula, who refers to them as her "babies" or "poopsies". They are dark, mysterious and extremely competent henchmen who neve...
2023-06-04 21:23:01 +0000 UTC View Post
Take a breath and go ahead and sign the scroll! with Ursula's fishbone pen and contract pen holder, now available to download below!
The fishbone pen prints and fits together in 2 parts and when assembled measures roughly 32cm long. Its designed to fit with Zebra Dood...
2023-06-04 10:06:51 +0000 UTC View Post
Now complete with Flotsam & Jetsam Rings, the Ursula ring holder is available to download below! I printed the tentacle at 10cm tall in black filament using my standard settings, which I then painted with Arteza royal purple and lilac. It fits about 5 small rings comfortably or more if you ha...
2023-06-02 02:37:48 +0000 UTC View Post
The sea and all its spoils will bow to your power with King Triton's Trident, now available below!
There's 2 sizes available and both come in clean and ornamental versions. The small trident (32 cm) easily prints in 2 parts and when assembled is roughly the same size ...
2023-06-01 02:32:54 +0000 UTC View Post
All of Ariel's underwater treasures are now available to download below! I printed them in red PLA using organic supports on Prusa Slicer except for the thingamabob which was printed using my standard settings on Cura. I painted them using a base coat of Valejo game colours with a top coat of Art...
2023-05-26 20:44:01 +0000 UTC View Post
With the release of the little mermaid live action today, the first character we added to the collection this month was Ariel's loyal companion, Flounder! This model was so much fun to make and I really enjoyed every step of it, Flounder is such a fun and love-able character and with his bright c...
2023-05-26 16:51:39 +0000 UTC View Post
Decorated flounder is now ready to download below! this time I printed him at 6cm tall on FDM and the test print ran great. I've had an awesome idea for a little home for him to live in and I needed a smaller version of him to work with that, but the attached stl is still 8cm tall like the origin...
2023-05-22 22:54:07 +0000 UTC View Post
The first version of flounder is now all ready to download below! The test print ran smoothly and I'm happy to report he balances fine on his fins. I printed him at 8cm tall and he's a little face heavy due to the shape of the model so if he ends up a bit like a weeble wobble, some light sanding ...
2023-05-19 20:50:17 +0000 UTC View Post
A little sneak peak at Ornamental Flounder, he's all done and should be out on the page later tonight if not tomorrow depending on how the test print runs. He's on print now so fingers crossed!
Thanks,
Harley
2023-05-19 00:25:18 +0000 UTC
View Post
Flounder is Ariel's best friend in The Little Mermaid and often accompany's her on her adventures, although he's frightened easily and would rather not go he tags along in order to prove himself to be brave as well as keep Ariel safe.
I've decided to model the picture above...
2023-05-18 10:14:01 +0000 UTC View Post