Happy Halloween!
I've done more rigging work this month, which unfortunately doesn't get a great image showcase. However I've also written down a roadmap for creating content asap in Unity/Unreal Engine.
On the Gaming Roadmap
Since my support count has declined, I've...
Hey ya'll, I wanted to share the small progress I've made on the rig.
- I have cleaned up the main throat rig & butt rig, deleting 'universal' joints which were in place for the secondary pussy walls.
- The butt rig has also gone through a similar process to the throat rig, where t...
Hey ya'll, I've got a Spore creation looking update for you guys this month.
This month I was able to achieve a little rigging and skin binding for the mouth x-ray (longest one out of the way first)
Combining 6 separate geometry sets into 1 for the inner tube, and 5 to 1 for the secondary s...
Hey yall, hope everyone's not just gooning out this summer and making the most out of it
Some small progress was made this month when I had the chance, next month I should have much needed time to focus on a good flow of progress (summer break from work)
The mouth x-ray geometry ha...
Hey guys, I hope everyone is enjoying the sun. Feels like this summer is exceptionally hot this year.
Unfortunately there has not been any progress in the 3D works, I'm in the process of saving IRL atm and things are going fairly slowly as I live alone & support myself.
Thankfully ever...
Hey guys, hope everyone is enjoying the warmer summer days!
There's been an update on Quillia's Corruption, a bit of proof reading and polishing off a WIP story
2025-05-31 08:34:14 +0000 UTC
View Post
Hey guys! I hope everyone has enjoyed the change in weather and had a chance to get a nice easter break. I'm quite happy to share some progress this month (although still small) as I feel like I've had a turning point recently where more of my time has been freed up. That being said, I've had a s...
2025-04-30 22:57:34 +0000 UTC View PostHey guys, I just wanted to let you know that I've made a decision to temporarily take down anything above Tier 1 on my platforms. This is because I don't believe the frequency of my work is currently worth as much over Tier 1. It's been bad on my conscience and would continue to be until it has b...
2025-03-21 15:39:18 +0000 UTC View Post
Rigging sometimes has a lot of back and forth, which was a more apparent this time around.
I layed out the new x-ray bits over the old ones, but realized it needed more control for the individual bits.
Just like the 'zip-up' key, I created individual keys for each 25 left and right wall...
Hey guys, hope you're all doing good. This month has been pretty hectic for me and unfortunately I haven't had time to do much creative work.
A very small amount of progress was done on the outer wall for the uterus:
- The edges were all straightened and snapped to the same edges of the...
Hey guys, Happy New Year!
There has been some progress on the x-ray model:
Womb model retopology (remade with slightly more detail + UV layouts)
Outer wall for the Womb including the 'kissy part' (aka uterus hole) created, so that when x-ray is enabled, it ...
2024-12-31 20:39:45 +0000 UTC View PostHey ya'll, I'll keep it short and say I wasn't able to do any work for the game port this month.
Anyone who has subbed to higher Tiers has my word that they won't be removed even after lowering their support tier. This will continue until some type of publishable content comes from anythi...
Hey guys, I hope you all had a nice Halloween!
I will try to keep this post as positive as I can, but I should first mention that I have made no progress on the game port this month.
I am being constantly tested in life and feel like I can't catch a break. Although I have been very bu...
2024-10-31 23:14:31 +0000 UTC View PostHope you've all been doing good. I don't have images for this month aside from the one I posted on discord as all the progress has been in rigging and skin weights. Anyone who caught the one stream I did saw the progress made
Unfortunately I have made very little progress this month as I ha...
2024-09-30 20:36:29 +0000 UTC View Posthttps://www.redgifs.com/watch/activelatepelican
As I tested out the strand rig in the model, I noticed there needed to be some more details that I had not accounted for. I hope you can all see the vod u...
2024-08-31 20:29:11 +0000 UTC View Post
Hey guys, been trying my best to slowly recover from all I've been dealing with lately.
I've managed to setup some blendshapes to align some of the 'Innie Outie' models and do some work on the womb bit in my free time (bullet points in the last post)
I've really been out of it, I may ha...
Hey guys, I wanted to take this chance to remind you again that I highly suggest moving down to the $1 Tier for the time being.
I appreciate your support greatly, and by no means am I losing interest with my work.
Lately I have been flooded by waves of difficulty IRL, for one being busy ...
2024-06-20 11:48:54 +0000 UTC View Post
https://www.redgifs.com/watch/rotatingsaddlebrownmallard
Secondary wall Pussy (Including rig & UV's) - A challenging thing, mostly in trying to keep the poly count low (in-game performance)....
2024-05-30 13:42:59 +0000 UTC View Post
I've barely had any time to do progress this month, but have some good irl news at the end.
Model & UV Updates
Separate main mouth model - An individual higher detailed mouth separate from the x-ray model. This will be used for gape shots and what not. It has been given an individ...
2024-04-30 11:51:09 +0000 UTC View Post
Model & UV Updates
A big hurdle with the x-ray mechanics is trying to predict the best way to have the bits setup in game without causing a strange effect. I feel like my current idea is a solid lead which took some time to consider. (I may be talking alien here today, so feel free to s...
2024-03-31 22:37:04 +0000 UTC View Post
I wasn't able to do much this month because of a irl work and getting sick (again). The time off that I've asked for will finally be taking effect this month and I might finally have time to do a stream!
What I managed to get done this month is create the procedural model for an innie outie...
2024-03-01 13:46:29 +0000 UTC View Post
Model & UV Updates
Most of the updates this month involved realigning and smoothing out edges to make a more comprehensive UV.
Making the UV for the ear circular: I originally didn't want to do this, but I figured if I'm going to perfect things before porting it to a game th...
Hey guys, I wanted to post an update this month but unfortunately I have had almost no time to get anything done.
I have done some progress on the face model for the game port, but not really enough to show in a full update (the topic in question is the outline for the eyelid plates where the ...
Heya guys, it's been a while! I will keep you updated in a separate post but wanted to share the progress I was able to do so far.
I have recently finalized a checklist I needed to do to update the base face so that it can be shaped better to any NPC frame. This means any tweaks on custom s...
2023-11-29 00:26:38 +0000 UTC View PostHey guys, hope you all like the new GamePort Update. It may seem like there is a lot of detail in that post, but it is a lot less than I was hoping to get done this month. TLDR; I have been very busy irl with work, travelling and a course, leaving only 2-4 hours a day to work on my 3D stuff. (I f...
2023-11-29 00:12:54 +0000 UTC View PostThe full animation is ready!
Download: https://mega.nz/file/mrxkwD5T#ivqSgrWkJPD_IrKiaF9MKsdXO5TaKe0_7ezM5_asZPs
Unfortunately there was a delay with the VO, but I'm glad to be able to focus on new things now
The time has finally come! With the last scene of the Troy X Osira animation complete, I'll begin to work on the updates needed to move my workflow into Unity
I will first be going through a minimal checklist for rig & model updates to get functional characters in the game engine. I may...
2023-10-16 11:18:17 +0000 UTC View Posthttps://www.redgifs.com/watch/alienatedrealflyingfish
Rendering has begun for the new 7 second loop. It should take around 2-3 days to render (4m each frame, currently 79/410.
I don't remembe...
2023-09-28 18:48:48 +0000 UTC View Post
little preview for the Tier 1 subs! the renders for the intro & blowjob scene are complete, the next part of the animation will be doggystyle
2023-09-22 09:10:57 +0000 UTC View Post
Renders are underway for the blowjob scene! This project is much less complicated and the renders are super fast, so I think you guys will be seeing some fresh content soon
2023-09-20 21:47:46 +0000 UTC View Post