Quick video to help people with MAP sensor & VE table selection.
Let me know if you guys like this kind of content and I can do it more frequently.
2024-09-01 19:40:13 +0000 UTC View Post
Let me know what you think. If you have a specific topic you'd like me to cover in another video let me know.
2024-06-16 20:30:32 +0000 UTC View Post2 Bar Desired Air/Fuel Table (Previously only 4 Bar)
Dual Wideband Input & Updated Input Pins (Previously only Single EGR Input)
Bank 1 And Bank 2 Closed Loop
MAP based spark tab...
2024-06-10 03:26:13 +0000 UTC View PostNarrowband O2 Sensor Bug - Causes O2 trims to not update, which could cause a lean or rich condition that will max out the short and long term trims.
This bug only impacts users that have the narrowband closed loop enabled.
It is fixed in the attached V4.5 patch....
2023-08-09 13:08:34 +0000 UTC View Post
I've created a discord to try and help communicate with everyone. I hope this will not only help me keep in touch with every, but also allow everyone to discuss amongst themselves. F...
2023-06-09 15:38:31 +0000 UTC View Post
Starting to think about putting together ideas for V5. I have some features that I want to add, but I'm open to adding to the list. Also if you would like to see one of the current features improved please comment about that too.
Here is my current list:
Edit 2: I tested the fix and was able to confirm that both issues are fixed. I've uploaded a new version of the Boost OS Patcher (V1.4) that will allow you to upgrade to BOS V4.4 that includes the fixes.
Edit: I believe I found the bugs and hope to get the fix tested soon for both issues. 2023-05-28 00:45:22 +0000 UTC View Post
I know I called it Boost OS, but there is nothing wrong with a little laughing gas. I haven’t used it before, but I would like to hear if anyone would be interested in some features to help tune for or even control a nitrous system.
If you have an idea of what would need to be added or a ...
2023-05-15 16:18:24 +0000 UTC View Post
I put this video together to help go over the patching process as well as give a brief description of each of the features and how I intended for them to be used.
I hope this helps as I've have a few questions on a couple of the features and I'm sure there are more people that haven't reach...
2023-04-16 16:53:33 +0000 UTC View PostIt’s been 5 years since I first built my bench top PCM for testing. I’ve come a long way in understanding and writing code. I’m sure I have a lot more to learn, but I’ve accomplished more than I thought I would be able to without having any schooling in programming. I still have more idea...
2023-04-15 13:48:37 +0000 UTC View PostV4 of my Boost OS is ready for release which includes some new features. I'll be making a video describing all the features in a little more detail hopefully soon.
Full Feature Set:
Version 3 of the boost OS which includes many new features. This operating system is a patched version of the 12587603 OS that is for the P59 (1mb blue/green connector) PCM.
------ Feature List ------
Attached is the bin already patched and XDF with bug patch to resolve a few bugs I found while testing.
I took some extra time to verify each feature was working as intended which took quite some time, but I did find a couple bugs because of it so I hope you all should have a very good work...
2023-02-07 00:56:23 +0000 UTC View Post
Version 3.2 has a bug that when running a 1 or 2 Bar VE table the fueling will be rich and inconsistent causing a very difficult time tuning. I believe I have a fix coded up and one person has confirmed that it fixes the issue. I would like to take another day to verify it is fixed before releasi...
2023-02-03 20:39:33 +0000 UTC View PostLooks like I found a bug in the code that selects the table for the 2 Bar VE table and it will always use the 4 Bar VE table in the event that 1 or 2 is selected for the Boost Table Enable.
I've added a simple patch in the XDF attached to fix this bug and updated the BIN file for any ...
2023-01-30 01:34:55 +0000 UTC View PostOk, so I forgot to add a table to the XDF that allows you to edit the Wideband Ready Voltage for the closed loop fueling code.
Attached is the updated XDF with that table added in the Closed Loop Fueling folder. The values will likely need updated for anyone that is using or wants to use th...
2023-01-29 19:54:45 +0000 UTC View PostSo I'm getting pretty far along with the next version of the OS. I haven't done any testing yet, so there are probably some bugs that I will need to go back in and fix, but at least most of the code is implemented.
Here are the new features in Version 4:
Did a quick video talking through how a raw analog input can be found. If you have any more video ideas for reverse engineering be sure to comment down below as this is something I enjoy making and it's nice to help out beginners as I wasn't able to find anything like this when I started.
2023-01-13 07:04:18 +0000 UTC View PostI've started to think about the features I'm going to add for the next version of the custom operating system. If you had any ideas please leave them below and I'll use them to help decide what new features go into Version 4.0
Things I'm thinking about adding:
1. Gen 4 MAF Table
Version 3.0 of the boost OS which includes many new features. This operating system is a patched version of the 12587603 OS that is for the P59 (1mb blue/green connector) PCM.
------ Feature List ------
My first video on reverse engineering the 12587603 OS, made for the P59 PCM which is commonly used in LS powered vehicles.
2022-07-20 18:31:35 +0000 UTC View Post