Hey guys!
Happy Halloween! In some parts of the world it's still the 31st, so it definitely counts!
Despite the fact I'm a little late, I hope you will enjoy this extra creepy Friesian Nightmare horse. I also made a normal version of her, which I will aim to upload tomorrow.
A...
Hey guys!
After jokingly uploading Slender Horse, Melbourne Mini Painter (https://www.melbourneminipainter.com.au/) took it as a challenge to make the joke into a serious thing. She modelled a little tie...
2020-10-25 22:58:13 +0000 UTC View Post
Hey guys,
While I was working on my Friesian Nightmare, I showed some progress pictures to some of the Patrons in the Discord chat. While they were cheering me on during the early development stages, they soon realized that the beauty and grace of the Slender Horse got lost in the details...
Hey guys!
Annnnnddd, here we go, the official release picture! It needed to wait for a bit but here we are. In the meantime, Hathoria relentlessly worked on this boy and made a pre-supported version for all resin users out there! Thank you so much, Hathoria, you're the best!
The ch...
Hey guys,
I've got a little surprise. Over the past few months I've familiarized one of my friends with Zbrush and how to make models (the way I do it at least, haha). Now he's ready to show off one of his creations and thought it would be nice to share it for free. He modelled his st...
2020-10-18 21:08:53 +0000 UTC View Post
Hey guys,
Well, it was about time, but here we go: the Megaloceros Peryton, based off the extinct Irish Elk, a huge species of deer that roamed the Earth thousands of years ago. This is Sabrina's prize for coming second in my last painting contest, and I wanted to go a special route w...
2020-10-18 03:07:05 +0000 UTC View Post
Hey guys,
It's about time I reveal a small part of the upcoming model. Next up we will have another painting contest prize: a Peryton requested by Sabrina! While pondering over the twist I could add, I decided to go for a Megaloceros instead of a standard stag. I'm really excited abou...
2020-10-09 00:41:16 +0000 UTC View Post
Update: now with official release picture!
Hey guys!
I'm going to keep this short, cause it's super late over here, but here's the third pose of the Pookah Squirrel Soldier for Ill Gotten Games (and the second model for September). I'll do some additional renderings tomorrow, but for...
Hey guys!
A couple of amazing things happened today. First off, we reached over 50 Patrons. Just thinking about how many people that is, I feel overwhelmingly supported and it means a lot to me that each and everyone of you enjoyed my works enough to take this step. So thank you so much! ...
Hey guys!
Now the release is official, since it's got a release picture. I was kind of fond of the dark and mysterious look from the extra shadows, so I decided to keep that for most of the render pictures. Also, I split the model in half to make the whole thing fit on resin printers....
2020-09-22 22:24:04 +0000 UTC View Post
Hey everyone!
It's here, the first prize of the previous painting contest: a Kitsune with nine tails gradually turning into paint. Or, in my concept, a pouncing Kitsune with its paint tails splattering in all directions :D Tomorrow, I will make decent renders of the model and will also ...
2020-09-22 00:21:39 +0000 UTC View Post
Hey guys!
I realized it's been a while and that it's time for an update. The next model is almost ready to be uploaded, I just need to polish it up a bit. It's Hathoria's painting contest prize: a Kitsune with nine tails gradually turning into tails of paint. It's a really fun concept...
2020-09-20 00:15:14 +0000 UTC View Post
Hey guys!
For those of you with resin printers: you can now download a pre-supported version of the Bush Viper Quetzalcoatl. A huge thank you to Hathoria, who wanted to share her Chitubox files with the rest of you. You can check out her print over here: 2020-09-06 15:34:45 +0000 UTC
View Post
Hey everyone!
And now it's official, the Quetzalcoatl got a release picture! I did update the file, as there was a minor mesh error that wouldn't affect the printing process, but is solved now. So if you didn't start printing yet, I'd grab the better version off of google drive first ;)&n...
Hey guys!
It's finally here! My nemesis of August, the dream contest model of your choice, with way too many scales and feathers: the Bush Viper Quetzalcoatl :') While it was a real struggle to tame this beast, I am very proud of the outcome. I think this is probably my biggest and most a...
Hey guys,
I want to be honest with you. I underestimated the sheer amount of work the Quetzalcoatl was going to take, and as the end of the month is approaching I realized due to the detail I wanted to put into this thing, I'll only be able to provide one model this month. At first I felt b...
2020-08-26 22:52:34 +0000 UTC View Post
Hey guys!
Just a quick update, I didn't forget about you, but I have been severely distracted by a certain little guy. Meet Loki, a young Western Jackdaw who basically crash landed in our garden with severe signs of heat stress. However, after my brother and I gave him a couple of juicy g...
Hey guys!
Sorry for the delay, I had an intense weekend of celebrating my birthday with the people closests to me (in phases, to make stuff coronaproof of course). It was interesting, not being able to hug and get near each other, but I had a blast.
Meanwhile...
2020-08-10 01:42:59 +0000 UTC View Post
Hey guys!
From now on, everyone in the UK, EU and U.S. can pledge my Patreon in their local currency of Euros (€), British Pounds (£) or U.S. Dollars ($). This will help prevent you paying extra conversion fees from your bank or card when pledging in a currency that’s not your own.&nbs...
2020-08-06 13:55:50 +0000 UTC View Post
Hey guys!
Just a friendly reminder that you have one week left to enter the painting contest in order to win custom made 3d models, made by me. If you need to refresh your memory about the rules, check out the original post here: 2020-08-01 15:36:00 +0000 UTC View Post
Hey guys,
And here's the final model for July, a new Pookah Squirrel Soldier, now complete with rifle and menacing look. Another commission for Arian (Dutchmogul) from Ill Gotten Games ( http://www.illgottengames.net...
Hey peeps!
He's done! This is a Pookah Squirrel Soldier, commissioned by Arian (Dutchmogul) from Ill Gotten Games ( http://www.illgottengames.net/). The Pookah are a faction from their RPG, "Wayfarer", of which the han...
Hey guys!
In exactly three weeks it will be a very special date, as it will be my birthday and basically the one year anniversary of my 3D printing and modelling adventures, since that was the day I got my Ender 3.
To celebrate I thought it would be fun to throw another painting cont...
Hey peeps!
Time for an update. Things have been going a bit slower than usual since I've been pretty ill for the last two weeks (got tested for corona, but fortunately the test results were negative). Over the weekend I got a bit more energy again and started working on this guy.
...
Hey guys! Ha, so, last poll actually ended in a three-way tie, which means we ended with a top 3 anyway. Since I don't want to be the one who has the final word in this, I thought we could do a quick revote with some changes. First off, you can only pick one option now. Second, it was brought to ...
2020-07-08 01:04:37 +0000 UTC View PostImportant edit: the platybelodon now has a mouskateer ( a mouse wearing three musketeer clothing, hat, and rapier) rider. Thank you for your attention, you may now proceed to vote.
Hey guys!
Thank you so much for reaching another milestone with me. I absolutely loved...
Hey guys!
Just a reminder that you have one day left to leave a comment on this post ( https://www.patreon.com/posts/new-milestone-to-38746031 ) describing your ultimate dream 3d model in...
Hey guys,
And finally, to wrap June up, the last model of the month. One of my Patrons, Tony, suggested this guy and as I was already going through a theme with the samurai animal gang, I thought it would be a good fit.
Meet HuMa, Tony's Yakfolk Monk. I really fell in love with th...
Hey guys!
Only a couple of months ago I announced we hit the first milestone of $100 per month. And now we've doubled it! I didn't put this one in as a goal originally, but I thought it would be a nice surprise ;) 2020-06-29 22:01:16 +0000 UTC
View Post
Hey guys,
I got a couple of requests from resin users to get a cut version of my Green Sea Turtle Dragon so they would be able to print him in full size as well. I took the time to learn how to do it and I think it worked out pretty nicely! I uploaded the separate files in the google ...
2020-06-24 15:10:44 +0000 UTC View Post