Michelle Lampe

Green Sea Turtle Dragon Release!

Hey guys! 

It's here, the first model for June! And a self chosen subject for that matter ;) It felt quite refreshing after all the models made for polls and prizes, even though I really enjoyed those as well. It's good to experiment with your own creativity ever now and then.  2020-06-21 01:12:58 +0000 UTC View Post

Two Wolves - Set of Rings (free STLs for competition)

Hey guys,

I decided (very last minute) that I wanted to participate in the Cults3D jewellery contest in order to try to win myself a resin printer. I designed two rings that represent the Good and Evil wolves from my favorite legend: Two Wolves! You can grab these rings for free over at m...

Green Sea Turtle Dragon sneak peek!

Hey guys! 

I started the new model this evening and since I'm already really enjoying the progress so far, I decided to let you in on it this early ;) Behold, the beginnings of the Green Sea Turtle Dragon! 

Sea turtles got a special place in my heart ever since I had the opp...

Cherry Blossom Oni Treant

You travel through the Deep Dark Woods. Sure, you could have taken the path around, but in this way you cut at least a couple of hours on your way back home. Suddenly a spiny shadowy figure draws your attention. Startled you turn, only to see a cherry blossom, vaguely human in shape. The branches...

Cherry Blossom Oni Treant

Hey guys! 

Time to reveal a little bit of the next model! Remember the last poll? That's right, it's time for the first Treant: the Cherry Blossom. 

I have to admit, I struggled quite a bit with how I wanted to tackle this one. I've been looking up a bunch of Treant depictio...

Ninja Three-Toed Sloth Release!

Hey guys, 

Time for a new model! A Ninja Three-Toed Sloth as requested by Sebastian. I had loads of fun with the design and had some initial doubts whether it would work with half the face covered, but the super furry arms and claws made up for that (and make him recognizable enough in...

Ninja Sloth and Cherry Blossom Treant

Hey guys, 

It's that time of the month again, here's a little preview for you! As you might recall, Sebastian won the right of a suggestion for the next model by entering the painting competition a month ago. He asked for a ninja opponent for the Samurai Rabbit And Serow Goat and liste...

Treant Tree Species Poll

Hey guys, since it has been requested quite a few times and I'd love to get to work on a plant based creature for once, I've decided to work on a Treant this month. The thing is, I have a hard time picking a tree species that I like best, so it's up to you what you'd like to see! Here we go: ...

Red Fox Model Release

Hey guys, 

Here he is, the Red Fox, the 2nd generic forest animal that I created following your choices from the poll. He can be used as animal familiar, companion or wild shape form and stands 30mm tall, though he can be easily rescaled. However, I wouldn't go lower than 20mm with a 0...

Red Fox is almost here!

Hey peeps,

I got very close, but the release of the red fox has to wait until tomorrow, as I definitely need to grab some sleep right now. He is all posed, I just need to clean up some of the surface areas (they get twisted due to the posing ;) ) and prepare proper STL files. Thank you fo...

Red Fox sneak peek!

Hey everyone,

Here we go, the next model in line, the Red Fox (or Silver Fox, depending on what color you'd paint it), the generic forest animal that won the poll together with the Lynx (made last month). I'm working hard on getting it released on the 30th, so stay tuned ;)

Hope y...

Samurai Japanese Serow Goat Release!

Hey guys,

At last, here's the model requested by Sabrina after she won the painting contest. She wanted me to make an animal form of her favorite Samurai, Zatoichi, a blind samurai masseur who relies on his other senses to fight in battle. She asked for a very characteristic pose of him hol...

Next model: Samurai Japanese Serow Goat

Hey guys, 

I hope you're all doing well! I figured it might be time to show you a little peek of what I'm currently working on. It's the 3D model won by Sabrina, who was generous enough to let me make the model available for the rest of my Patrons! As she really enjoyed the Samurai Rab...

Painting Contest Winners!

Hey guys! 

My first painting contest has come to an end, and it's time to announce the winners! Winners, you might ask? Yes, seeing that there were two participants, I decided they both deserved something for their time and effort. So without further ado, let's head over to the results...

Eurasian Lynx Release! Painting contest ended.

Hey guys, 

It's still March in some parts of the world, so I'm going to count this as a March release ;) 

Without further ado, here's the Eurasian Lynx model, which was one of the most requested animals from the poll! It can be used as either animal companion, familiar, wild...

Eurasian lynx in progress and painting contest reminder

Hey guys, 

I hope you're doing well! I wanted to cheer you up with a sneak peek of the next model: the Eurasian lynx, usuable as animal familiar, companion or wild shape form. I found there were very little lynx miniature models out there, so I decided to go with the lynx first instead...

Giant Jumping Spider Family Release!

Hey guys, 

Things changed rapidly over the last few days regarding the Coronavirus. My town is the place in the Netherlands that has the highest ratio of sick to healthy people, and the only nearby hospital has reached its full capacity. I thought I'd be super productive with this peri...

Painting contest, win a custom 3D model and poll results!

Hey guys! 

First off, I hope you, your family and your friends are all in good health and I wish you all the best in these strange and concerning times. I myself live in a region of the Netherlands that's more or less the epicenter of the Corona outbreak for my country, and I expect me...

Generic Woodland Animal Poll 1: which animal model would you like to get first?

Hey guys, I've got quite some requests for generic animals to be included as part of my Patreon alongside my usual "out of the box" models, since there's a need for encounters, wild shaped druid forms, companions and familiars. I didn't want to start off with too many choices, so here are the mos...

Giant Jumping Spider up next!

Hey guys! 

I just started on the first model of the month, a Giant Jumping Spider! I got a couple of requests for random encounters and spiders were named several times. Since most of the spider miniatures out there are based on tarantula's and wolf spiders, I wanted to go with a diffe...

Samurai Rabbit Release

Hey everyone!

And here he is, the Samurai Rabbit which was requested by Cody after he won the raffle! There's two versions of this guy, one with his ears tied together and one with his ears free. You can pick whichever you like best ;) 

A huge thank you to Cody for being so kind ...

Model Links Masterpost

Hey guys, 

This post will be updated when I release a new model so that the links are all in the same place and easy to find, as I will pin it to the top of my Patreon. 

Here we go!

African Cheetah: 2020-03-02 14:25:02 +0000 UTC View Post

Samurai Rabbit coming up (as final model for February)

Hey guys, 

As you may remember, one of my Patrons, Cody, won the last raffle. He requested a Samurai Rabbit (inspired by Usagi Yojimbo) and decided the model could be shared with all the other Patrons. So that's what you're getting next (I'm working hard on it to get it released by tom...

Peacockatrice: official release

Annnnnddd, here is the final compilation of rendered pictures of the Peacockatrice, which is now available here on my Patreon! You can find the files in the previous post :) 

Sorry for the spam everyone, I think I'll simply make one post which I will pin for my Patrons with all the dow...

Peacockatrice Release

Hey guys, 

Here you go, the Peacockatrice is now available through the Dropbox link. I'll make a mock-up of renderings later tonight. A second pose coming soon is highly likely, as I'd love to...

Peacockatrice sneak peek and separate Archie

Hey guys, 

Here's a little preview of the Peacockatrice since he's almost ready to hit Patreon. I'm aiming to get him posed and cleaned up by tomorrow evening! I also wanted to mention that I added an STL of Archie the Tawny Frogmouth without either a base or tree trunk for everyone wh...

Archie the Tawny Frogmouth familiar test print

Hey everyone, 

I just wanted to show off the print of my friend's familiar, Archie, that I did yesterday. I swapped my 0.4 mm nozzle for a 0.2 earlier this week, and I'm pleasantly surprised by its performance so far! No clogging or other problems yet and the quality is superb. This pr...

Bonus model: Archie the Tawny Frogmouth familiar

Hey guys, 

This one needs a little bit of explaining. One of my party members of our current d&d campaign got a familiar last session, and since I designed a miniature for the whole party already, I was bound to design her familiar as well. Meet Archie, the exasperated Tawny Frogmo...

First Raffle Winner!

Hey everyone, 

It happened, we reached the first goal! And that means it is Raffle Time! At first I hesitated whether it was too soon to set up goals when I created this Patreon, but all I've seen is positive reactions so far and I'd love to add some more goals soon. 

Anyway...

Raffle time is almost here. One more Patron to go.

Hey everyone, 

The Winter Wolves got a bunch of new Patrons converted to the point that the first goal is almost reached! Only one more Patron before I will let the random number generator do its work and select one of you to win a custom 3d model. A little extra information on what wi...