stuffmadehere

Directors commentary: Mini golf auto aim

New video: real time mini golf aim correction

Director's Commentary: Egg Cracker

Hey everyone!

It’s time for another patron-only director’s commentary livestream!

Join me on Thursday, September 11th at 4:45 PM Eastern as I walk through the egg cracker...

New video: automating egg cracking

I've always wanted an egg cracking tool. You can buy them, but they all seem to have various shortcomings. It's not surprising because egg cracking is one of those problems that's super simple to understand but rather complex to do reliably.

The trickiness of the problem convinced me that I...

Director's Commentary: No Edge Pan

Hey Everyone!

I'll be hosting a patron-only Director's Commentary livestream for my latest project - the no edges brownie pan!

Join me Tuesday, June 10th at 3:30 PM Eastern as I go watch through the video and constantly pause to share details that didn't make the fina...

New video: building an edgeless brownie pan

Hey Everyone!

I just wrapped up my latest project: building a brownie pan that bakes without any hard, chewy edges. What started as a simple idea turned into a pretty involved build - with a lot of machining. The ...

Kinetic helicopter: livestream wreckage analysis

Hey everyone! This Friday 3/7 @ 4pm EST, I’m hosting a patron only livestream looking back at the kinetic helicopter project. I’ll be sitting down with some tools and going into much more detail as I take apart ...

New video: kinetically powered helicopter

I  had a simple idea for a simple project: try to spin one of those little propeller-on-a-stick toys really fast to see how high they can go. Of course one thing led to another and the next thing I knew I was building an extrem...

Camera project directors commentary livestream

Join me for a patron only livestream this coming Monday (Dec 30)! I'll be going through my latest project video (approximately) frame by frame and discussing all the details that didn't make the final cut. I'll also try to answer any questions you have live as well. It's always cathartic to share...

Raw image data from single pixel camera

If you're interested in messing around with the raw image data from my camera, here it is! Trying to render it into an image is a fun exercise with a lot of potential ways to doing the projections.

The data is packaged extremely inefficiently (but extremely portably) as JSON with the follo...

New video: Camera with a software controlled lens

I just wrapped up a project where I build a very strange type of camera. It can only take a photo with one pixel at a time but it can build up complex images by combining a ton of 1 pixel “pictures” that it takes over time. If you’re familiar with software rendering, one way to think about ...

A very technical teardown of a 3D priter

Earlier this year I visited Formlabs HQ. I used to work there and spent countless hours developing SLA 3D printers. During my visit they offered to let me tear down their latest printer 2024-11-13 21:49:39 +0000 UTC View Post

Directors commentary livestream this week!

Hey Everyone,

Join me this Thursday at 3pm ET for a directors commentary livestream on my lil' bikes project. I'll be going through my project video and sharing details and anecdotes that didn't make the final cut. For example the fact that I actually had to redesign the frame of the smalle...

New video: The pursuit of the smallest bike

As an avid cyclist I've always loved bikes. As an R&D guy I like the idea of making stuff that doesn't have a clear solution. I decided to put those two passions into a blender and the result was my latest project: seeing just how far I can 2024-08-10 18:28:42 +0000 UTC View Post

New video: Disc Launcher V2

After having the idea for this project living rent free in my mind for almost two years, I decided it was time to finally build it. I've documented the overall process with all of its ups and downs in my latest v...

Dunk boots commentary livestream next week!

As with most of my projects, my pneumatic dunk boots had a TON of details that got left on the cutting room floor. Although they didn't make the final cut, I still think they're interesting so tune in Monday Feb 12th at 3PM Eastern as I watch through the video live and pausing constantly to share...

Dunk Boots!

I just wrapped up my latest project:  tall self extending stilts with the goal of dunking as high as possible / becoming inspector gadget. If you're interested in seeing the video you can check it out here! 2024-01-03 02:42:16 +0000 UTC View Post

Directors commentary Tuesday 10/17!

A lot happened in the process of building all those pencil sharpeners. After fitting 2.4TB worth of footage and 10 sharpeners into the video (4 didn't make the cut), there was a lot of details and interesting stuff left out. It's time to remedy that, at least in part.

Join me next ...

New video: 6 unusual pencil sharpeners

I've been keeping a list of weird pencil sharpening ideas for several years so I finally decided to build the coolest ones! This was a lot of fun and a neat way to make a variety of mechanisms grounded in a problem that everyone understands. 

Your support enables me to make things like...

Exciting news!

I thought you might enjoy this little sneak preview from my upcoming project. The rest of the video is being edited and should be done pretty soon! 

- Shane

Thousands of postcards: trials and tribulations

My postcard robot project is an excellent example of the difference between a prototype and a real product. After getting the robot writer working and 2023-08-24 14:58:08 +0000 UTC View Post

AMA This Week!

Join me this Thursday 8/17 at 4pm Eastern time for an AMA! If you haven't been to one before, I'll be going through and discussing whatever topics or questions that you have. 

You can drop questions in the #ama channel on discord, the comments this post, or in the live chat. The earlie...

Last call for addresses!

If you'd like a pseudo-handwritten postcard from the super duper handwriting robot and you haven't yet put your address...

The handwriting robot

Finally! I've made it through the fire and the flames of a most painful edit & export process and the video is live!

There's a lot that I could say about this project, but I'll save it for the upcoming directors commentary livestream. I'll be scheduling that soon to watch through the vi...

The export from hell

The past 24 hours have been a letdown. I finished editing the video for my latest project and I was pumped because I wasn't up against a deadline. In fact I was still working out some details with the sp...

Livestream AMA!

Hey Everyone, 

I'll be hosting a livestream AMA next Wednesday 3/22 at 3PM Eastern time. If there is anything you're interested in having me discuss feel free to ask it in the #ama channel on discord or in the...

New Studio!

After moving out of my rented warehouse in September, I haven't really had a workspace. I crammed way too many tools into my garage and then jammed the rest of my tools and small parts into shipping cont...

Puzzlebot Part 2 Directors Commentary

Hey Everyone, 

It's time for the long overdue directors commentary for the second installment of the puzzlebot. As usual I'll be watching through the video and pausing constantly to share details that d...

Interview with the CEO of Formlabs

A couple of months ago I sat down in my densely packed garage with my old boss Max Lobovsky. We talked about my time working at Formlabs, doing YouTube, a bit about cycling, and the general state of tools. It was a fun conversat...

Puzzle robot part 2 is done!

It is done! We'll technically last week it was done. And also there is a lot of features that I didn't get to... but I made a video!

2022-12-06 19:51:04 +0000 UTC View Post