Full May Preview
Added 2022-05-02 15:23:37 +0000 UTCFor May we Have the Following Models (Images still being added):
- Aqueduct
- Water Wheel
- Ore Stampers
- Trip Hammers
- Blast Furnace
- Ice House
- Granary
- 2 hills
- 2 plateaus
- 3 Solid Fill Houses
Iron Works
This is a huge water wheel powered, iron works set. 90% of the set is geared for resin printing and comes with chitubox support files. a few things like the giant blast furnace are intended for FDM printing. The set is huge with the following features:
- 10 inch tall blast furnace. (aligns with our scaffolding)
- 2 giant bellows opperated with trip hammer
- Giant water wheel with gear options on both side
- Trip operated stampers the 3 ore trays
- Trip hammer with 2 slots and 3 hammer options
- Aqueduct with boosters to create hight variations for turns
Plateaus And Hills
This is a set 4. 2 hills and 2 plateaus. They are set up for FDM printings.The hills are smaller 2 part prints, the plateaus are larger and divided into 4 parts each and require a 8 inch print bed. This is the first set, they are low. the plateaus will work will provide a base for most small and medium buildings with room left over. These are born out of my personal dissatisfaction with styrofoam. It is intended that you scratch build on top of these.
Icehouse and Granary
The set features an Ice House and a Granary. They are set up for resin printing though certain parts could be FDM printed or printed with auto-supports. There is a stack of ice that you can resin print in clear or clear-blue. The Granary can be elevated at 3 height options.
These are both, often overlooked but essential buildings. The granary is designed to prevent rodents from getting into dried grain. The central chamber of the icehouse is actually intended to be very deep. The ice is there to represent the top of what is a deep pit.
Solid Houses
These building are solid models for scaling. They have NO interior or playable space. Support files are NOT provided as the options for scale are many. I have left these buildings at 28mm scale for anyone who wants to vase print with supports. These models are not for 3d print novices.
_____________________________________________________________
