Based on some of the feedback I decided to re-shot the last half of the video after spending some more time with the device so I could do a better job demoing it. I also attempted to compose and perform something on it as well. So I go over a lot more on the device and some uses and have far less...
2021-01-04 04:08:38 +0000 UTC View Post
I would be interested in some feedback on this one because it was a departure from my recent videos and a return to the style of video I started out making. I'm frequently recommended to try making lower production quality videos in fill in the space between my big ones and &nbs...
2021-01-02 02:41:30 +0000 UTC View Post
Alright, this video is now done. There is some kind of visual artifact after the intro that I don't know why happened but it did it twice with different renders. It make be a problem with the new version of the editing software I tried this time. I'll look into it more later to try and fix.
This is a fairly early look at the next video. It has some rough edges, "by" instead of "at" in the beginning, ungraded/color-corrected clips, and missing some some things like a schematic visual and the intro and outro. But I wanted to give you an early look at this video since it's been a while...
2020-12-21 02:28:51 +0000 UTC View Post
Hello, I've still been working on stuff in the background. The VGA capture video is pretty much fully researched at this point and I have about half to two thirds of the script done for it. It's just ended up being way more complex than I thought because there are a lot of small details you could...
2020-12-11 19:20:36 +0000 UTC View Post
Here is the video that I had nearly done that I mentioned in the last update. I did rough color correction on most of the shots but it's not a fully polished video by any means. I'm beginning to form an idea of how I could present this when it's all over but it won't be a smooth video like I plan...
2020-11-29 17:04:30 +0000 UTC View Post
I wanted to give everyone an update where I am with this. I'm going crazy trying to finally get this done and while I think and hope I'm getting close to the end I'm not exactly sure how I'm going to be able to make a video out of it at this point.
UPDATE:
The new motherboard did come i...
I'm getting good at picking projects that are full of problems, frustrations, and delays...
I built a new editing system that I wasn't really planning on and I'm working on a video about it, or at least I'm trying. I have been having a constant issue with my editing software on this system...
Pending any issues cropping up, this should be the final version of this video.
Changes from the last version:
- A note about SVGA mismatching and some cuts to make it matter less and be slightly smoother
- V Sync animation
- Interface pinout animation while discussing the CGA,EGA...
Hello, I am so sorry for how long it has been since my last video. This project has just been one thing after another with delays and things that pop up. This isn't a final version of this video but it's at least at watchable stage now. I need to add a lot of on screen text elements, a few images...
2020-10-27 00:08:32 +0000 UTC View Post
Hello, I know it's been a while since I've had a video ready but it's been one of those projects that keeps feeling like it's going to over after just one more thing and then another thing pops up after that.
I built a new VGA capture system with proper VGA capture hardware this ...
I am setting up a new modern system that will be getting featured in a video soon. But I wanted to dual boot linux and Windows on it for hardware support reasons. I've been meaning to detail some of the things I picked up about setting up a nice duale boot system for a while and having the new we...
2020-10-02 23:11:51 +0000 UTC View Posthttps://techtangents.net/
I've finally gotten around to making a proper website and have put some stuff up on it already. One of the things I'm looking forward to is being able to create addendums for my videos as a text pos...
Here is the super long cut of the SK-88 repair video. I felt this was too long but I explain a few of my thoughts for some things in a lot more detail in this. Mostly for the 3D printing. So it may be of interest if you were curious about that.
2020-09-26 21:58:03 +0000 UTC View Post
This is the first project at my new workbench! I'm not totally thrilled with the lighting in the wider shots but I think it may have been good for up close shots.
This is repairing the second Roland SK-88 I have that was bought as parts to fix the one I reviewed. So it had multiple things ...
Getting this thing installed and setup was an unexpected detour from my projects but a very welcome one! I now have a proper workbench for designing and repairing things! I mention it about 30 times in the video but I am so excited to finally have a solution for my work area like this. It complet...
2020-09-19 14:31:38 +0000 UTC View Post
Consider this a preview upload, something went wrong between the rendered file and the upload. The actual file looks fine but this is a little too contrasty and saturated. It's probably the color stuff I've been working on recently, I'll probably have to re-grade the video and re-render it with d...
2020-09-09 03:31:01 +0000 UTC View Post
I kind of just wanted to do one of these because it had been a while and needed to reassemble a keyboard. So I put two and two together and this is the result!
I had the lights a bit too close to me when I was filming this and it was the first "video" I've edited after a few changes that I...
I'm posting this one a little later than usual because I have been working on it right up until now to get it done for release tomorrow.
But here's a video on rebuilding a Gateway 2000 G6-333 with it's original Windows 95 install! I was very graciously sent this system and it's been a lot ...
I was sent this calculator in the last mail video and it is just one of the coolest simplest things I've come across. This is just a fun little look at putting it through its paces to see how you can use it.
UPDATE: I fixed the audio and the visual fade I wanted. This will be the final ver...
Here's the final version of the Tiny Pentium PC's MIDI upgrade. This has the hardcopy supporter print out in it as well! Thank you to everyone who jumped on to that. After setting it all up it turned out to be a bit cooler than I thought an I look forward to it evolving in the future!
2020-08-11 16:05:06 +0000 UTC View Post
Hello! I am finishing up the next video right now and rendered out a pre-release version of it here. I've got a few more things to tighten up and a couple of graphics to add. This is also going to be the first hardcopy supporter video, it's not included in the preview yet because I wanted to spen...
2020-08-06 04:41:26 +0000 UTC View PostAs I mentioned in a post I have been thinking about adding a tier for printing out names at the end of videos on an interesting printer. Well I'm ready to try it out now!
The new tier has been added and I figured I would go over what all my plans are for it!
I have too many vintage ...
I've been toying with the idea of playing some of my older games in streams on Twitch. I finally gave it a shot and rather enjoyed it. Here's a recording of it.
This isn't exactly my normal content so I don't know if everyone would prefer me posting these types of videos here or mention wh...
I think I mentioned this ins one of my behind the scenes videos that I'm been considering this idea and I keep forgetting to record a sample before the end of the month so I can ask what everyone thinks of the idea.
For this I would add an alternative $5 tier that would be opt in to be put...
This was an interesting video to tackle that didn't really go how I planned. I thought it was going to be much harder to get 4 floppy drives installed and working once I finally got my hands on a 4 drive controller. But, they just worked. I had absolutely no problems with it at all.
So thi...
Here's the video on getting that HP-38E working without getting one of the weird batteries it needs. This was cut from the existing mail footage because it covered it well enough to not need to reshoot.
2020-07-07 15:37:06 +0000 UTC View Post
I'm finally opening viewer mail that's been sitting around for way too long!
This video was delayed by really bad internet issues that kept me from being able to upload it for three days. Sorry for the delay, I tried a bunch of different things and had some help but I couldn't get anything...
This video has been too long in the works. I'm really sorry. I kept running into problem after problem and it just kept going.
But it's finally done and now that my server is back up and running and I actually have somewhere to put footage I can get back to filming. I've been going crazy w...
Hello!
I've been meaning to make one of these for a while and I had a fun idea on how to do this one.
One correction, at one point I think I say "mid March" when I meant "mid May". It really feels like April was just skipped this year and I keep making that mistake.