A successful musician to I know went through a long, dry period. His band would tour America, year after year, and routinely play to crowds of 20 people. Sometimes less. His record...
2019-04-03 11:33:47 +0000 UTC View Post
Friends:
Last month, after literally years of filming with the most basic lights imaginable, I was able to buy these LED light panels.
Wow. What a difference. These things are light and easy to adjust and they just pump out more light. Filming is easier. Editing is easier....
2019-04-02 10:40:15 +0000 UTC View Post
Friends:
Woodwork for Humans is a hit! All the recent videos in this series have gotten more than 10k views in their first week. My video on the $30 bench got 12 thousand views in less than 24 hours. I'm stoked!
Also, if you didn't see it, I did a premier for the $30 Workb...
2019-03-29 21:11:31 +0000 UTC View Post
Okay, I'm excited about this one.
For a few weeks, I've been promising a real workbench that could be built for a mere $30. Well, it's here and it works.
Brilliantly.
You really can make this bench for about $30 worth of construction lumber and some glue. I use...
2019-03-26 00:42:20 +0000 UTC View Post
Friends:
You might have noticed that I didn't get a video out. I'll spare you the details. Life got crazy, blah, blah, blah.
The point is that I'm back in the saddle with not one but TWO videos this week. The $30 bench build is DONE and just needs some editing. That will b...
2019-03-23 13:35:33 +0000 UTC View Post
Friends:
Hot of the heels of last week's video where I tuned up a cheap hardware store plane, I bring you this comparison of a bad plane and a good one. A lot of beginning woodworkers probably have no idea what makes one plane good while another is only mediocre. So, taking the Stanle...
2019-03-10 20:06:33 +0000 UTC View Post
Friends:
Sometimes you've got to get back to your roots. My roots are cheap tools and it doesn't get any cheaper than the Stanley 12-404. This bargain-basement plane has no frog, no cap-iron and the most ridiculous adjustment mechanism that I have ever seen.
But it only co...
2019-03-03 00:55:49 +0000 UTC View Post
We've had a good run, but my lathe and I are coming to the end.
If you've watched any of my turning videos, you've seen my Harbor Freight 32706. Brand new, this lathe costs less than $300 and that's a stunning value. The 32706 has a 3/4 horse motor, 12 inches of swing, and a cast iron...
2019-02-27 12:00:03 +0000 UTC View Post
Friends:
I had such a good time making the 3 tool bench that I decided to follow it up with another 3 tool build. This time, I'm making a mallet with the same hatchet, saw, and drill. When my mallet is done, I have something to hit my hatchet with, which makes it a lot more useful.&nb...
2019-02-23 20:40:50 +0000 UTC View Post
Friends:
This week, I'm bringing out the next installment in my series on basic woodturning tools. A lot of turners struggle with understanding gouges. What is a gouge? What kind do I need? There's the spindle gouge, the bowl gouge, and the roughing gouge? Do I need all three? Can I u...
2019-02-17 13:52:19 +0000 UTC View Post
Friends:
Do you own a bit-brace?
No?
I don't blame you. They seem a bit, well...ridiculous. I know that many of us love our hand-tools, but we're not stupid. I buy my lumber planed; I own a nice table saw. I'm not out to make more work for myself. When I need to dri...
2019-02-10 14:47:27 +0000 UTC View PostSo, I've been using some less common tools recently. I just did the bench with a hatchet as the main tool and I loved it. Splitting wood is really efficient, and chopping is a great way to remove wood fast.
I've also been using framing chisels. Big ones; like over an inch wide and 10 ...
2019-02-06 02:00:01 +0000 UTC View Post
Friends:
My latest video is a thorough discussion of the Parting Tool and it is part of a longer series where I'll explore the most common lathe tools in detail.
Now I know what you're thinking: "Wait a minute, Rex. Isn't this just more shameless book promotion? Haven't we...
2019-02-02 18:18:32 +0000 UTC View Post
Friends:
I feel like I'm always telling you that I've had a crazy week, but it's really true this time. We got the heat back on, but then we got heavy snow followed by a heat-wave and such unusual rain that the storm-drains backed up and my shop flooded.
2019-01-28 01:11:10 +0000 UTC
View Post
Friends:
I recently had to make a workout bench for my wife and she wanted it FAST. So, rather than use traditional mortise-and-tenon joinery, I turned round tenons on the lathe. Then I made mortises by just drilling holes and I wedged my tenons for an ultra-tight fit. The whole thing...
2019-01-19 19:39:04 +0000 UTC View Post
Friends:
Here's the Tip Sheet for my latest video on turning green wood. The idea with these is to combine text and images in a compelling way so that readers can get the information of an article, but at a glance instead of having to read a long post.
If anyone has thoughts or ...
2019-01-14 12:56:43 +0000 UTC View Post
Friends:
The fun never stops around here. Yesterday, my furnace went out. Apparently, running a furnace in the middle of a wood shop is a sub-optimal situation. It's just a tiny sensor that blew, but the HVAC dude didn't have it and can't get it until Monday (of course). So, we've got...
2019-01-13 13:27:07 +0000 UTC View Post
Friends:
I made a toy sword for my nephew over the holidays. I would have loved to get the video out before Christmas, but that just didn't happen. I'm lucky I got the actual thing made in time, let alone the video. I swear the wrapping paper almost stuck to it, the finish was so new....
2019-01-05 18:25:37 +0000 UTC View PostFriends:
It's a new year and it's time to make some changes for the better. I've been unhappy with my thumbnails for a long time. I like the blueprint background and the aesthetic of the technical drawing.
But the background I was using was too bright and often clashed wit...
2019-01-04 11:59:46 +0000 UTC View PostFriends:
Tomorrow, the special guest for the Creators Collective Podcast will be none other than me! I'm very excited to be joining three very talented makers to discuss my new book _One Week to Woodturning_
Have I mentioned the book?
Anyway, you can catch the...
2019-01-03 01:39:18 +0000 UTC View PostFriends:
Many of you have been in touch since I posted about the whole Patreon debacle. Rather than write a bunch of little individual replies, I'll just thank you all for your totally overwhelming support and trust.
I've lost a few Patrons (and no hard fe...
2018-12-30 12:17:40 +0000 UTC View PostFriends:
Like me, I'm sure many of you are aware that Patreon recently banned the political commentator Sargon of Akkad for what they termed violations of their terms of service. Many of you have expressed concerns about this situation.
I share your concerns.
I...
2018-12-28 16:38:56 +0000 UTC View PostFriends:
I'm always thinking about tools. Which ones do you need? Which ones can you do without? Which tools are just scams?
With this in mind, I decided to do an overview of the woodturning chuck. What's it good for? Do you need it?
This is part of my overall ...
2018-12-22 23:46:27 +0000 UTC View PostFriends:
This is the last day for free copies of my book _One Week to Woodturning_. Getting free downloads helps me climb the rankings and it's valuable to the book's success. Feel free to pass the word to friends and family.
If you do get the book, a quick review on Amazon is EXTREMEL...
2018-12-16 12:49:59 +0000 UTC View PostFriends:
So it turns out that you can't make your book free on the day it launches, so I'm going to make it free Saturday AND Sunday.
I'd also like to invite you to tell ANYONE you like about the promotion. I'm still only telling my Patrons about this deal, but giving away free b...
2018-12-14 11:26:58 +0000 UTC View Post
Friends:
I've been coming along with my blacksmithing, but I only get to forge once a week at the club I belong to. I want to get in more practice, but I can't safely forge in a woodshop.
So, I came up with a practice system that allows me to work on the basics of smithing withou...
2018-12-13 12:25:49 +0000 UTC View Post
Friends:
It's a big week for me. My new book, One Week to Woodturning is now finished and available for pre-order on Amazon.
The book is a complete guide to the equipment of woodturning and...
2018-12-11 12:06:34 +0000 UTC View Post
Friends:
The Real Lathe is done and it works. The details are all in the video. It's been a wild ride building my own full-size machine tool, but it's also been a lot fun and a HUGE learning experience.
Thanks so much for sticking with me and supporting me as I chased this one down. 2018-12-06 19:48:08 +0000 UTC View Post
Friends:
Last week, I had the privilege of hosting two fine fellows in my shop for a private class in hand plane restoration. We took a vintage Stanley and a vintage Record and took them from flea market find to working tool. It was a lot of fun.
2018-12-04 11:49:51 +0000 UTC
View Post
Friends:
I've had a little illness in my house this week and I haven't been able to get a video out. But my Patrons should always get something good, so I've done the first in a series (hopefully) of AMA videos. I just tackled a few questions here, so if I didn't get to yours, that will happ...
2018-12-01 14:31:25 +0000 UTC View Post