Maple3D

#834

Drednaw is ready to charge into your collection with a brand new release. You’ll get both a Basic version for a clean, straightforward print and an Ornamental version with extra details to really make it stand out. Some supports will be needed for both versions, but the final result is well wor...

May Poll!

Use your voice and vote in the poll to see what gets modelled next! The top four at the end of the time will be the lucky ones that gets done in the Basic version and the Ornamental version. You will have until April 30 at 5pm EST to get your vote in so don’t wait too long and miss out!

Display Box - A lot of Files!

This is a BIG one for sure! If you want somewhere to display your models and want it to look good while doing so this is the way to do it. The Display box comes in two sizes, the smaller one fits 4x6 plexiglass and the bigger one that fits 5x7 plexiglass. There is also a lid piece that has a slot...

TCG Deck Case

This one is as much for me as it is for all of you guys! The Deck Case can hold up to 100 cards double sleeve or 60 cards plus the Accessory Box. There is also room on the sides for your Leader/Commander to be stored in either a top loader or snap case. You wont need any supports so it's a pretty...

#096

Drowzee is here and ready to hypnotize your print queue. This release includes both a Basic version for a simple, clean look and an Ornamental version with some extra flair for display. No supports are needed for either, so it’s an easy print from start to finish. And if painting isn’t your t...

#127

Pinsir has arrived and it's ready to bring some serious attitude to your collection. This release includes both a Basic version for a clean, classic look and an Ornamental version packed with extra detail. Some supports will be needed for both versions, but the print is straightforward and well w...

032. Nidoran

Nidoran is ready to hop onto your print bed with a brand new support-free release. This drop includes both a Basic version for a clean, straightforward look and an Ornamental version with extra details if you’re after something a little more eye-catching. Both versions are optimized for easy pr...

TCG Playmat Storage

This one was born out of necessity for myself but I'm sure some of you can get use out of it too. I needed somewhere safe to store my One Piece TCG Playmat and didn't like anything that I could find so I designed my own. This prints in 3 pieces all without supports and keeps your playmat nice and...

Duck Skull!

Another skull is out now and you have a few different versions to choose from. There are the standard Solid and Hollow versions but I have also split the forehead jewel from both so if you wanted to you can print that in maybe a red silk and add it in after for a bit of flash to the skull. The so...

April Models!

So I decided to switch it up a bit for this month and go ahead and pick a few Pokemon that have been close to being picked but could never quite get there. So to add to your collection soon you will see

Nidoran (M)

Drednaw

Drowzee

Pinsir

I’ll also be looking at try...

#653

Fennekin is here and ready to print, no supports needed. This release includes both a Basic version for a clean, simple look and an Ornamental version with extra details for a more dynamic display. Whether you're a fan of its fiery charm or just looking for a fun new print, both versions are easy...

#055

Golduck is ready to dive into your collection with a support-free 3D print. This release includes both a Basic version for a clean, simple look and an Ornamental version with extra details for a more dynamic display. Whether you're a longtime fan or just looking for a fun new print, both versions...

#610

Axew is here and ready to join your collection. This release includes both a Basic version for a clean, simple print and an Ornamental version with extra details for a more dynamic display. Supports will be needed for both, but the final result is worth it. And if you want to skip the painting pr...

#302

Sableye has emerged from the shadows and is ready to print. This release includes both a Basic version for a clean, simple look and an Ornamental version with extra details for a more dynamic display. Supports will be needed for both, but the end result captures Sableye’s mischievous charm perf...

Tag Team Diorama

This one has taken some time to get all put together but I finally made it to the end! Straight from the Tag Team TCG card featuring Mega Sableye and Tyranitar you can now print the artwork in 3D. This one will look best done in resin but for those that only have an FDM printer there is a solid v...

Groudon Skull

The Groudon Skull is here, bringing some prehistoric power to your 3D printing lineup. This release includes both a solid and a hollow version, plus a custom display stand for the solid skull. To make printing easier, the model has been split into three pieces, though supports will be needed. Whe...

#478

Froslass has arrived, bringing its icy elegance to your 3D printing lineup. This release includes both a Basic version for a clean, classic look and an Ornamental version with extra details for a more intricate display. Supports will be needed for both, but the final result captures Froslass’s ...

March Poll!

It’s that time again for another poll for the next month! February has gone by so quickly I feel like it just started. Make sure you use your voice and get in on the poll and pick something good. Top four at the end will be the ones that get modelled so choose wisely. The poll will end on Febru...

# 117

Seadra is here and ready to make a splash. This release includes both a Basic version for a clean, simple print and an Ornamental version with extra details for a more dynamic display. Supports will be needed for both versions, but the end result is well worth it. And if you want to skip the pain...

#454

Toxicroak is here and ready to print, no supports needed. This release includes both a Basic version for a sleek, straightforward look and an Ornamental version with extra details for a more dynamic display. Whether you're a fan of its sleek design or its menacing stance, both versions are optimi...

#760

Another two models are out now and they are the Basic and Ornamental designs of the cuddly Bewear! You wont need any supports for these so it's a nice and simple print for eveyone. You also have a painted 3mf file for those that have an AMS and want the coloured version.

Enjoy!

So Much to Download!

Apologies for the delay in the next release for all of you, there has been a nasty run of flu's and colds running through my family so it's been tough to get the computer. On top of that I wanted this next design to be just right and it's taken sooo much trial and error to get this one just how I...

Prehistoric Skull

We're starting the month off with a bang! You can head on over to the website now and grab the Awesome looking Tyrantrum Skull in a few different variations. There are the typical hollow and solid versions but I have also made a simple display stand that the specific solid version can slide on to...

#488

The last of this month's Ornamental and Basic models is out now and if you have been following along you knew that Cresselia was the last of the bunch. This one will need supports but I have split the rings from the base body so that it is an easier print for both the ornamental and basic versio...

February Poll

Well it’s time for yet another poll to decide the fate of the next four models that will get made. You have until January 31, 5pm EST so don’t wait too long and miss out! It’s been -30 degrees Celsius for about two weeks straight for me so on that theme you have a few ice Pokémon in the po...

#697

The next release in the Ornamental and Basic versions is the big and beautiful Tyrantrum! You will need some supports under the chin and under the torso but everywhere else should be ok to be without. You have a painted 3mf file for those that want to do the full coloured version as well.

H...

#282

You can now go and grab the set of Ornamental and Basic versions of the lovely Gardevoir! Minimal supports may be needed depending how your printers handle small overhangs but I have done my best to keep the design true to the original while still making a printer friendly design. You also have a...

Villain Series - Part 6

The next part to the Villain Series is out now and there's only one more to go after this one. This time it's Team Plasma that Pikachu has joined up with and just like the others you have a painted 3mf ready to go. You will need supports between the feet but otherwise you should be all good.

Villain Series - Part 5

Yet another one is out for all of you and in part 5 in this series you can go and grab the Team Galactic variant of the lovely Pikachu! Just like all the previous versions you will need some supports between the feet but you should be all good everywhere else. You again have the painted 3mf file ...

Villain Series - Part 4

Pikachu is looking sharp in his orange suit now that he's a part of Team Flare! Supports will be needed between the feet but that's it for this one. You have a painted 3mf file ready to go as well.