I've just tweaked the design and printing out version 2 (slightly tight a the base) so hopefully this one will be the final release. Print is nice and prints without support (assuming you've got a well dialled in printer!). It's a scary print with thin edges and overhangs / bridges. You can of cours...
2018-06-09 13:37:00 +0000 UTC View Post
I've done the first test design for the Jabba Glass (matches the tray I published a while back). Has 4 magnets in the base to match the tray, just printing now, without supports!! Some challenging bridges and angles but we'll see. The STL is available on the Patreon early bird share (in the Jabba tr...
2018-06-09 08:43:37 +0000 UTC View Post
Hey, I've updated the R5 dome published yesterday, added support, added the breadpan boxes, changed the top to allow better panels and facilitate opening panels for those bad motivators. Same file / location just make sure you update if you have the older file.
Happy printing,
Mi...
2018-06-03 09:25:15 +0000 UTC View Post
The R5 single print dome is now in the Patreon Share (well 2 part print as the lower ring is a separate print but it's much easier than the jigsaw piece version). It's got some tough overhangs, I've added supports built in to accommodate the overhangs and to minimise plastic use. Not tested (I reall...
2018-06-02 08:58:45 +0000 UTC View Post
Hi all,
Here's the latest Fusion video 6, showing part 6 of creating the R4 Dome in Fusion finally published a printable single file! Also shared is the final Fusion design. Password for the Fusion Shares is mrbaddeley
I've added the backlog of of links also as I kno...
2018-05-28 20:23:40 +0000 UTC View Post
OK, not in the slightest R2 related (well, guess via Disney, twice removed). But I've designed the StormBreaker, Thor's new weapon from the Avengers Infinity War. It's a big old print (full scale). I'm no...
2018-05-28 19:57:03 +0000 UTC View Post
Session 6 for the R4 design is out. Link is... https://youtu.be/7hjoCDz-YYo
Files and backlog I'll publish tomorrow.
2018-05-26 19:12:32 +0000 UTC View Post
I've completed part 6 of the Fusion Design video (this is part of the dedicated Patreon series, taking you from the basics through to a full dome design) and part 6 has resulted in the Single Print model for those with the Cr-10 s5 (500x500mm print bed). In the Patreon share, you'll find the R4 fold...
2018-05-26 07:41:26 +0000 UTC View Post
I’ve fitted the centre lift module to the main frame. Really wanted to test the strength of the lift frame. Fit is good, want to reduce the size a little bit and strengthen a tweak but overall it’s coming along. it’s going to be a big job as I said before, as this part is critical. I will rele...
2018-05-15 05:29:40 +0000 UTC View Post
Here’s the Fusion design for the legs and greebles (as requested 😊).
I also thought I’d put the links to all the fusion files in one note (and add to it as Patreon isn’t particularly user friendly.
All files are free to do whatever you want to with (
Just finished the main frame (and printed it now). Got to say I’m extremely happy so far. It’s very, very strong and fits together nicely like a big Mechano kit. The gearing is tight and smooth. So far, so good. Just printing the platform now for the centre leg, again happy with the design. Got ...
2018-05-06 14:40:38 +0000 UTC View Post
Here’s the Fusion design for the R2 trays, I’ve included both three and two leg versions, although I suspect the two leg version isn’t so popular.
I also thought I’d put the links to all the fusion files in one note (and add to it as Patreon isn’t particularly us...
2018-05-05 10:53:20 +0000 UTC View Post
The lift mechanism is really coming together, but fancied something different in my spare time. I've wrestled with sculpting (rather than hard modelling as I'm used to) for some time, never with any real success. Anyhow I thought I'd give it a go again with Mudbox and really pleased with the first a...
2018-05-02 20:13:04 +0000 UTC View Post
The centre lift mechanism isn't easy. You've got to fit the thing in the middle of Artoo, not interfere with the dome or dome rotation mechanism. It's got to be strong, robust and fairly fast. Also it's got to take the weight of the full droid and finally there's loads of electronics (it's got to kn...
2018-04-28 09:14:24 +0000 UTC View Post
I've added a single print option for the drive gear for all those who have huge... printers. Happy printing..
Mike.
2018-04-27 21:35:58 +0000 UTC View PostFinally got one which I’m happy will let me test.
2018-04-22 08:25:40 +0000 UTC View Post
A fabulous contribution from one of our community, Hajuskin is an alternative Drive Belt / Wheels for the drive mechanisms if anyone is having issues. He's very kindly shared with the group so I've added to the public share in the feet drive section for anyone who wants to test / use this configurat...
2018-04-21 07:08:31 +0000 UTC View Post
A huge apologies for the delay on getting some notes together on attaching the lazy susan (I've been Lazy :-) but they're here now. I've added them to the instruction folder in both shares so it take you through step by step on how to get it all together...
Happy Assembly,
Mike.
2018-04-21 06:58:19 +0000 UTC View Post
A whole weekend of printing and testing tolerances... I've literally printed the drive gear box probably 4 or 5 times. Nearly there, still got some tweaks but I'm happy with the running and meshing of the gears. Overall pleased. Size wise, I've still got some chopping to do, to fit the lift mechanis...
2018-04-15 17:59:18 +0000 UTC View Post
Ok, so we have R2, R5, R6, R7 and R9 ready to print! R4 is Work in Progress.
Happy printing,
Mike,
2018-04-07 10:31:56 +0000 UTC View Post
So we've got both a single print and segmented dome ready to go. The Panels / Greebles fit both and all supports are built in!
Happy Printing
Mike,
2018-04-07 09:58:34 +0000 UTC View Post
I've just updated the R7 dome STL (single print). No biggy, but forgot to put the holes on the base of the dome to match to the ring. If you've started printing you can continue and drill out using a 4mm drill (or restart if you're only just in). Caught this one early :-)
Happy printing...
2018-04-07 08:05:02 +0000 UTC View Post
I've had a few questions on getting started with Fusion, just a quick reminder (and look back through the Patreon posts), we've got 6 or 7 videos on starting with fusion and the live build of the R4 dome (still to be completed). These are available along with the models to all dedicated Patreons ($5...
2018-04-07 07:23:06 +0000 UTC View Post
Hi, I've added the R7 dome onto the fusion shared for all my dedicated Patreon. Enjoy, tweak, modify or customise!
Password as always is mrbaddeley
So this time I'm releasing the full single print dome first. This R7 dome I'm really pleased with, I've added built in support for all details so hopefully it will print with no extra support. The file is in the Patreon share (top level). I'll upload greebles etc soon.
Happy printing,
...
2018-04-06 09:14:36 +0000 UTC View Post
Only a small (but nice) update. I've tweaked all the doors to use the 45 degree angle print like the side pockets. They're much easier to print, need little assembly and most importantly appear to print with virtually no bend or warping (thank the maker!). Don't worry, the R7 dome is on it's way soo...
2018-04-05 20:29:18 +0000 UTC View Post
I’ve altered the door cuts, always bugged me on previously builds the number of pieces and warping. I’ve cut them the same as the side pockets and first tests look superb!! This is a half long door as my bed isn’t big enough for w full print but no support, no warping (ABS!) and look near perf...
2018-04-03 07:49:00 +0000 UTC View Post
