Oogie Funko Poster
Added 2024-10-22 14:15:28 +0000 UTCGrab the next addition of our Funko Hue Forge posters now available from the downloads post!
Who do you want to see next?? So far we've made Maleficent and Hades but I'm eventually planning on making all 6 of the designs below including a Dr. Facilier one which I'll have to make from scratch since it doesn't exist and if that works out Yzma and Queen of Hearts too. I'm absolutely in love with these and they're going to look amazing in my kitchen!
Side note for our sellers, this is just a personal project so if you want to sell these you'll have to purchase a separate license from HueForge.
Instructions:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x285mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Silk Black Transmission Distance: 0.6
PLA Silk Purple Transmission Distance: 4
PLA Silk White Transmission Distance: 5
PLA Magenta Pink Transmission Distance: 1
PLA Silk Green Transmission Distance: 5
PLA Silk Yellow Transmission Distance: 3.5
Swap Instructions:
Start with Black
At layer #14 (0.68mm) swap to Purple
At layer #19 (0.88mm) swap to White
At layer #25 (1.12mm) swap to Black
At layer #27 (1.2mm) swap to Magenta Pink
At layer #32 (1.4mm) swap to White
At layer #40 (1.72mm) swap to Black
At layer #41 (1.76mm) swap to Green
At layer #45 (1.92mm) swap to Yellow
At layer #51 (2.16mm) swap to White for the rest.
The print uses 6 colours and will auto pause at layer 33 so you can swap out the purple and pink for green and yellow.
I've got a couple more spooky releases for you coming next, stick around!
Comments
Would love to see Ursula next. :)
Michellylynn
2024-10-22 15:25:45 +0000 UTC
