UPDATE: Exclusive Flexi Factory Skeleton Snake!

still can't find the snake

Leigh Colclough

Hello, I can't find the snake available?

Israel5864

The waiting for August to come is hard! I bought all the other older skeleton ones! People LOVE these! Come on August, come faster! I want to print this to add to the collection of the other ones! Love your work by the way! Everything has turned out amazing!

Sandy

The downloads are generally here on the server throughout the month and then move to the archive. For members of April that didn't get a chance to download it I've mentioned it below several times but I'll put it here for those who are reading the top post. Members receive an archive link on the last day of each month. There's more information in the pinned post when you are logged into patreon. All you need to do is click the link to redeem and open the files in a free MMF account. You can store the designs you receive here each month for free if you miss them :-)

Dan

Hello I really want to print the skeleton snake, I missed the email with download, is it possible to get a download sent. thank you

Dawn

The file will be available for new members as an Out of the Vault Exclusive for $3.99 in August.

Dan

Is it possible to get the file, very cool and I'd like to give them a try

Terry Flick

Please check your email for the archive link. Once the exclusives move off the server, I send the archive link so you can redeem anything that you received last month

Dan

I missed the udated on this. is it possible to get it. I just started printing these and am having issues with the body.

Jamie Sanchez

The Exclusives move off the server each month as new members do not receive them. You will need to redeem your archive link that I email you in order to retrieve the snake if you missed downloading it last month.

Dan

I’ve clicked download link but the snake isn’t showing up, could you provide the zip file link in the comments?

William Czyzewski

60% is very small. Each bine has the tiniest of footprints. A thin layer of glue should do the trick. That is what I use on my textured plates. Just ran several of the new design and no fails for me. 15% gyroid infill, 2 walls?

Dan

The first 2 I did was with old file both failed, I just tried the new file after around 60% it has failed again :( , I used your setting for layer height and used, do I need to use glue or a frostbite plate, im not sure I want to try it again :(

Georgia Christo

We recently printed this as big as we could and it's fabulous. It's definitely the most fidgety. I'm not a fan of snakes either but love this as a sensory fidget.

PATCHTECH3D

I personally use basic pla settings (Not silk) for every filament in the bambu slicer. I print with 15% infill gyroid, 2 or 3 walls and .12 or .16 layer height. I do not adjust a thing else. I use the textured plates on my smaller bambu machines with magigoo or bambu polymer glue, and Biqu Cryogrip Frostbite on my X1Cs

Dan

What plate settings do you use in bambu studio? what plate do you choose in the the slicer? Do you also tweak the settings? Also, for the silk filament do you just choose bambu silk or do you use the generic silk settings when you print?

Sonia Nicol Alvarez

Me too. I'm using the original file but I'm glad that other people are having success with the other file :-)

Dan

we have printed many of the original files with no issues

Printables3dLab

Please see the post and link right at the top. Also download folder, pinned post. All files go to the download folder or Bonus folder :)

Dan

Where is the download link for the skeleton snake?

Andrew Felker

This new version is printing well for me with a Prusa Mk4s.

Brian Dye

I'm working on a 375% version......a rattler for the tail would be fun.....lol

Steve Beers

Why did I manage to print this 3 times in silk pla on two different printers last week with no problems but now I'm having trouble when it's about 70% done, sections are shifting on the plate.... ughhh.... I guess I'll try this updated version.

Melinda Livie

Thanks Dan, for solving my problem with getting your snake to print without a failure. Your update works great. Thanks for a great model.

Richard Knight

I use the frostbite... https://amzn.to/4j5dvdY

Dan

Can we get a rattler version...

Steve Beers

I only had issues with the silk filament. I printed several others on regular PLA using just the textured PEI plate and they all printed wonderfully! I am going to buy the cryogrip plate because I really want the silk filament to work but which one do you recommend?

Sonia Nicol Alvarez

No issues with 2 prints of the original version on my Guider IIs, but I appreciate that you are willing to rework the file to reduce failures for those who are having them.

Jared Kaufman

Update worked great at 100%.

gavin noy

I had 2 failures at the same point. I will try the update over the weekend.

Steven Boren

had multiple failures on 2 of my printers finally got one to come out on my kobra s1 at 60 % scale gonna try this updated file! maybe the enclosure of the s1 helped it out.

NVKHobbies

I have the first version going as I forgot there was an update. Im gonna let it fly as everything seems to be stuck well. Thanks for the update!

Jeff N

Definitely took a lot of patience to get it but it finally came out

Jimmey

Did you try the new one yet?

Dan

Just did the updated as a first attempt looks so good I’m fossil rock play lost adhesion at the tail while sleeping but still came out amazing

braxton bernstein

I am 1 for 4 at single color 100% scale. 2 for 2 at 130% scale 2 color.

Daniel

Haven’t had any issues on x1c with textured plate. Have printed 4 or 5. Couple coiled and one multi colored. Hope everyone gets theirs sorted, cus the snakes are amazing!

Tiffani

Just added a new version to try!

Dan

Had no issues on my standard Bambu A1 plate. Made sure it was cleaned fresh before printing. Came out amazing.

Stephen Gillum

A few months ago I started putting all downloads in the download folder (pinned when you are logged in) also linked at the very top of this post, and the collections tab at the top of the page. It is your one stop for all downloads.

Dan

Emmett Duprey

Had the first one print fine. The 3 after that have had an issue with one rib on each. A different rib each time. Its still connected but the layers look like they have shifted over. Cleaned the textured plate. Applied glue and trying again.

gavin noy

amazing model, love the feel in my hands when moving it around. I'm a big fan of the skellies and hope to see more of them

Mia Pidden

this comes out brilliant, great model

Alex Derrett

Just not working tryed different sizes tryed on Bambu xc1 and Snapmaker just won’t work gets thru some and comes apart

Judy Cox

That is odd. I test print on 3 X1Cs. I have the cryogrip plate. I do 15% gyroid infill, 2 walls, .12 or .16 layer height, but test with .2 as well. I use a. 4 nozzle and do not change my pla setting from basic unless I use a specialized material. I do regularly maintenance, level, clean heads, etc. But I try to keep it simple and consistent for testing printability.

Dan

Never had an issue with any other print, but the snake is driving me crazy. I keep losing one or two section on each print. Changed infill to Gyroid, knowing that grid has a tendency to knock pieces loose. I've tried normal Bambu settings for PLA at its recommended 70 degrees and 0 degrees which I use for most PLA. I've had no lick with both. I am using an X1C, I imported the STL, as I did not want it multi color. I could use some help!... Again, first ever Flexi model I have had an issue with.

Paul Gifford

A brim is a viable option. You can also add your printer and details to the Discord server in troubleshooting. I'd really like to help folks because I think aside from adhesion you do need to make sure you have a level plate and that you're extruder is not hitting part and knocking it off. I'm seeing some people say they lose it at 40% or 30% and this leads me to believe that their machine related issues. I don't want to speculate, so it would be very helpful to open up a dialogue in troubleshooting in regards to various machines and settings. Remember this is the most articulated model and those parts are quite small, so if any part moves or gets knocked off, if there's curling if you're heat and cool settings are off Etc it's not going to print as well as say the troll that has a giant footprint. I know many of y'all know this information, so disregard if this isn't news to you haha. I just want to help out those that are having failures. Some of y'all like myself I printed many many without failure. So I'd like to spread the love:-)

Dan

Are you referring to the 3mf or the stl? Both of those files are compatible with the h2d. I know the slicer has been making updates so that might be the issue?

Dan

Does anyone have the H2D printer? All my Patreon files load but won't allow the H2D to be used are the Patreon files not compatible with the new printer?

JR

What about a Brim ... would that be useful here? It's such a great design, but definitely a challenging print even with Magicgoo

Christine Whelan

I printed multicolor at 115 percent. Love it!

Donnie

i use glue when im printing heavily articulated prints

Donnie

Love this model!

Joseph Ploettner

Three attempts and it always comes off the table when it's about 50% printed. Any tips?

Vítor Wanderley

A jellyfish keychain and magnet is just another wish

Mark

Any chance of a jellyfish coming to join tattoo starfish??

Mark

This is my new favorite! It is so sleek and a great fidget too!

Bruce and Karen

Why the same place? Bed unlevel by chance or is the nozzle hitting it? Curling maybe? Troubleshoot on discord with photos and print/material settings if you can. I would like to help.

Dan

One stop shop now so all files go to the Download post (link at the top of the post above) Too many folks opted out of email and were missing the announcements throughout the month. So i made the post public, shared on sicials, and added the files for members to Downloads." :)

Dan

I am sorry to hear that. I don't have a K2 but have seen prints from all sorts of machines. Can you put some info on Troubleshoot on discord? i would like to help if i can. Due to the small parts and major articulation it has to have great adhesion. This is the 1st one I have done with soooo many links, so it would stand to reason some could fail. I personally had two out of a couple hundred on my machines fail, but that was during testing/design. I use cryogrip or textured pei with magigoo. My machines are fine tuned because they have to be for me to keep testing. and I do have a drying cabinet for all of my pla. If any of that helps. Plus I always print at .12 or .16 unless its a big print. 2 walls and 15% infill gyroid on these.

Dan

I am so sad because other then one printed at 120% i cannot get these to print under 100% i tried 85 slowed machine down, glue, no glue, etc. I love this design but my k2 does not like to print it unless it's big 😢

cody willis

I'm not seeing the files for download in my emails anymore. Has that changed?

Robert M Tamm

keeps messing up at 33 percent, tried 3 times, going to trying to make it smaller and see if that helps

Chris Powell

I wouldn't go that low. 60% works on the standard plate and it does print. But I really made the straight version for the print mill. The curved will print smaller, but I suggest quality pla and settings.

Dan

Would love a scorpion Skelton one day?!?

Amber

Awesome model again.

Olly

I printed the straight version on a P1P single color silk filament, printed great but pulling off the plate, all the smaller joints broke. 45% is pretty much max size on any Bambu printer, so don’t think these are going to work.

Mark

They come out so cool that big though!! I made one that big and 4 at 120 andd 1 at 75

Giamarie Saponaro

I decided to maximize the surface area of the plate and am printing at 140%! This thing will be massive!

NadinePaul Walworth

The coiled will work better than the straight unless you are doing them small. The links are quite tiny, so it needs great adhesion to print well. You can add photos and settings info on discord troubleshoot for help. i don't use brims but if you have adhesion issues, this could help for anyone having issues.

Dan

we've tried to print twice, silk pla. print fail both times, the print isn't sticking. p1p, pei plate, freshly washed and with the bambu glue. this was the coiled version. going to try one more time with the straight version and see if it makes a difference. i hope it does, it's a great looking model!

michael alfaro

Can you open up a ticket on Discord in troubleshooting? This is the best place to add photos and talk about your settings. I printed with that filament and didn't change the settings and I use a cryogrip plate. But I do know that some silks need additional hot/cool settings

Dan

Newbie here! Need guidance with settings. I ordered the silk pla from your amazon link that you used but when I try and print it some of the print comes off the plate. I used the regular textured plate and then I changed to the smooth plate and it did the same thing but mid print. I also tried the textured PEI plate again but with glue and still no luck. Am I supposed the change the default settings? And if I am can anyone point me in the direction of how to do it pretty please? I'm printing on my A1 with the generic silk settings and have used the textured PEI plate, the textured PEI plate with glue and the smooth plate. Is it because I'm using the A1? should I print it on the P1S instead? Any help and guidance is greatly appreciated.

Sonia Nicol Alvarez

Printed 100% on my a1 took 7.5 hours and turned out great I have another one going can’t wait to see how these sell

Ashley Fenstermaker

The movement of this is so satisfying to watch. These will definitely be going with my skeleton collection.

Leah Hendry

I'm printing three right now at 100% on my a1. 50% on my a1 mini. Then 75% one of my neptune 3 pro machines. I'll let you know how it turns out my a1 mini is iffy with adhesion at times lol

James Hunt

It came out great!

Ed Wilts

This is amazing. Printed it in bone white filament on my A1 mini. Now we just need the Skeleton Mouse to go with him.

John Lawson

Never mind. The indentions on the side of the lower head through me off. It literally goes behind that. I feel so stupid. I did have adhesion issues so I'm going to try it again.

Ray Hanson

I printed the curved body and a no eyes head at 100% in the top of the head was too small to snap on to the bottom head.

Ray Hanson

Not annoying at all. There's no direct link because it has to assign a bot for the private server. You need to go to your settings tab under apps and it will have you log in through there.

Dan

There are two heads. The one with and without eyes and both work at 100%. But if you're looking at the 3mf file I did provide the straught version at 60% with the heads to try and avoid any mistakes on sizing.

Dan

Wow, beautiful!

Dan

That is very odd. There is definitely no overhang issues that would need supports, so if you wanted to put it in troubleshooting on Discord we can take a look at your material and hot and cool settings. Only thing I can think because I printed a couple hundred of these to test.

Dan

I printed 2 at 100% one of the heads had a little tiny issue with no support by one of the eyes where they hangover. Printed 1 on P1S and A1 mini. I printed the snake at 150% on P1P turned out great but the head is not handling the over hangs at bottom of head. Haven't let it go to the nose yet. Tried several times. I am going to add supports. Printing at .16 bambu P1P. Any thoughts? Thanks! BTW cool print and I hate snakes!

Jacque Prince

Printed 2 overnight. Both came out great. https://youtu.be/gWfFf95NgLc?si=NA_S7IrXQw_NtW_1

Chris

aweosme!

tamara an

They printed awesome. But these are no joke. You need serious bed adhesion.

dkev

Never mind. I am a fool. I was so excited to print I must have chosen the wrong head.

Joan Dubois

look closely, it goes in the behind the holes on the cheeks

Mark Tuttle

Awesome, first one off the printer, amazing job on the joints

Mark Tuttle

I printed it. Can’t get the top of the head on. Looks too small?

Joan Dubois

I cannot seem to find the link for discord. 🤦‍♀️I did a search and look through posts. Sorry if it's an annoying obvious answer. 🥺

Heather M

Top of page, DOWNLOADS, click it. Next page DOWNLOADS HERE!!! click it and you'll see the file under Attachments.

@d3d_creative

Tell me how to download I'm new?

Vadim

Printed at 80% .. no brim. Took just over 5hrs .. came out nice

Lowi Lowi

Bambu A1, 100% scale i think was 10 hours or so, 120% is 14 hours. 135% was 16.5 hours if i remember correctly

Raymond Plummer

Only 4 more hours, printing at 120%, next will be a max of the print bed, if i can get the right filament for that one.

Raymond Plummer

What kind of print times are people looking at?

NotSo TacDad

I was just coming to see if anyone posted how long it took. What kind of printer did you use?

NotSo TacDad

Got completely done after over 7 hours and it fell apart because it looks like the top didn’t completely get enclosed but the printer showed done. I printed the curved one at 125%. I’ll try it on my other printer tomorrow. Looked cool until the back pieces all fell apart.

Chris Troutman

just did one in a gradient and no brim

Darjhin

Are you using a brim when printing this file?

jon scofield

Already got one on a plate so excited for this one!!!

Nicholas Cribbs

You can share to Discord, and if you have enjoyed that is through the settings tab under apps. You can always tag flexifactory in any of your Social posts. I always put a post up on socials as well and you can add your photos there. I love to see them :-)

Dan

Oh he's adorable.

carrie roehrig

Okay, first time failed a couple hours in due to adhesion. Cleaned the plate, trying again!

Amber

What's the best way to share photos? Any chats?

WildWest3D Creations

I love the Neon filament. Looks great in that 👍

PATCHTECH3D

3hrs left

WildWest3D Creations

I've got one on the printer now in Bambu PLA Glow Green filament.

Ed Wilts

I tried, just didn't work with this design for the skeli

Dan

WOW! This is SOOOO awesome! Thank you!

Silvyr

Wow, awesome. I am loving all the skeleton dinos and such. They are great sellers!

Jill Martin

And printing away lol once I finish the normal 100% I will make a big one. I'm to impatient lol

cody willis

Love it !

BradleyJames

Can you PLEASE make a snake with its tongue sticking out?

Torrey Tabor

I tested to 60% but that is small and parts may stick depending on settings. I think 75% is best.

Dan

How small is the smallest grams this can go? Setting up forna show and away from my office right now.

Matthew Freeman

Yesss! Already had it on the printer a couple hours ago, 5 hours left 🥹🥹

Amber

I have 2 printing right now, my wife bought some new filament to test out!

Galway 3D

On the MMF server. They are instant download and store on MMF when you buy them.

Dan

Literally running home now 🤣🤣

James C

Yes!

Python3dprinting

Looks great. How do we receive the files we purchased from the vault or "myminifactory"

Shadow Realm Designs