Exclusive: Flexi Factory Ladybug with Magnet Version!

*Monthly DOWNLOADS and BONUS Files can be found here.
...................................................................................................................................

Hi folks,

I know the last poll was a tough one! Closest runoff we have had in a couple years .The Ladybug was a fun challenge and a new mechanism for the wings was necessary to give it customizable options and the ability to "fly." 🤣

I did go ahead and add the captured magnet version. For those that think you may want a keychain, don't forget you can add holes and loops. I played with all kinds of options and just felt overall, it was a little too bulky and articulated to make a keychain a viable option. But if you're feeling jazzy... give it a try.

Happy Printing -Dan

*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :) To join discord, go to your pinned post and click the Discord Link! HERE

Print tips and Info:

I successfully test printed between 60% and 115% for this one. You can go big, no problem. The smaller versions have the littlest legs, so use high quality materials and settings. I personally feel 70% is as small as you should go.

• Right and left wings are interchangable, though there is a more correct way to place them.

• 8x3 magnets should be used for 100% and 6x2 magnets at 80%. Magnets are linked in the info below.

• STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

• I print with, 15% infill/gyroid, .12 or .16 layer height for quality.

• As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.

• Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List

• 1st and 3rd photo is 100% 3MF magnet and regular versions: I used a glitter red that is currently unavailable, but linked another option Ziro Diamond Red. Also note I printed one version with the black body and face.

• 2nd photo is 90% 3MF: Overture Yellow, Sunlu White, Anycubic Black

• 4th photo is 80%: Ziro Peachy Sunrise and Sunlu Red for the Wings
  
  All of my Public Releases that are not included this month can be purchased on My Mini Factory or Cults 3d with the 40% off code. See this post for more information: DISCOUNTS  Past Exclusives can also be found in this tab. Individual discount codes to buy for $3.99.