Withered Foxy - 3D Printing Files
Added 2024-10-17 21:22:09 +0000 UTCHere are the files to print your own Withered Foxy!
Model by: Beardless Props
A couple things to note:
There aren't any obvious mounting points on these models. Everything we did was very bespoke and custom to the makeover so we kind of just glued and added pieces to mount it in the best way we could. You'll need to figure that part out for your own costume!
The head and snout are HUGE so account for that when you glue it together and use it for your costume, prop, etc.
Print Settings
Nothing special, we used PLA and ran it at 0.28 layer height. :)
This is a BIG one so let me know I missed any parts or if you have questions!
🤘🤘
~Jay
Comments
If I recall, they are 3mm cylinders. We just print a big batch of them all at once, usually around 2cm long.
Wicked Makers
2025-08-29 12:41:59 +0000 UTCJust getting going on prints. The pieces have alignment pin holes. What is the intended pin?
J Hotwing
2025-08-27 23:45:13 +0000 UTCAwesome! I was looking at the 3D files for foxy, and I think the head file section is missing several parts. Primarily, the piece to attach the upper jaw to the main head. It would also be cool if you could add the adapter piece for the mouth mechanism, and maybe the eyeball mechanisms as well. Many thanks!
JP_D-03
2024-11-27 06:09:53 +0000 UTCDo you have a discord? i have a few eyemechs that could help you
landoncosplayfnaf
2024-11-23 15:03:02 +0000 UTCThat's the best foxy I ever seen, you guys are insane! I was checking on the model, but I noticed you didn't make a eyes and mechanism 3d print file, did you have any advice to find them?
Mike.S3cch10
2024-11-18 23:27:06 +0000 UTCThank you for the files, can't wait to finish this cosplay! i hope your bill cipher project goes well it looks awesome so far!
landoncosplayfnaf
2024-11-13 21:56:40 +0000 UTCIt got lost in the Halloween season shuffle. I will get it back on the list to post!
Wicked Makers
2024-10-23 12:54:49 +0000 UTCGlad to hear it! Happy we can share something that others enjoy and get value from.
Wicked Makers
2024-10-23 12:54:25 +0000 UTCIt's a stretch fleece! We got it at Jo-Anns. The pants are a faux suede.
Wicked Makers
2024-10-23 12:54:07 +0000 UTCwhat is the fabric used for foxy?
cat
2024-10-23 10:40:21 +0000 UTCI absolutely love that you share the 3d print files! Bendy is next on my list, then maybe Foxy. I finally just posted the Steamboat Mickey figure I made based on the 3D printed head you guys shared. Thanks again, this is very generous.
Laura Pinckley
2024-10-17 21:34:14 +0000 UTCDid you guys finish the bon 3-D print files yet?
Abbit
2024-10-17 21:24:49 +0000 UTC
