Extra: Christmas Baby Axolotl
Added 2022-11-18 23:02:13 +0000 UTCYou have access to all exclusive models!
- ZOU3D -> ZOU3D - Info and Download Links
If you are new to Patreon!
You can download the files from the link below and on the last day of the month you will receive all the files in your MMF, read the post below to find out the information!
- ZOU3D -> ZOU3D - Info and Download Links
If you were a member and didn't receive the files! send us an email support@zou3d.com !!!
If you have a question, please! Send a message to support@zou3d.com, this is our main communication channel!
We’ll help you! ❤️
Print settings:
Wall line count: 3
Infill: 15%
Comments
Anyone else have a problem with the tails coming loose during the print? The surface area is small and they are coming off and failing…
VooHooDoo
2022-12-13 02:16:53 +0000 UTCThat's what I'm having on this one and original. No matter what I do that last section knocks off
May
2022-11-25 22:19:46 +0000 UTCNeed to post Bambu/MMU painted versions for multicolour
2022-11-22 23:05:16 +0000 UTCgot 5 done all sold
William Hargraves
2022-11-21 00:58:11 +0000 UTCI also had a tail fail issue. I had 7 at a time going with multi color on my X1CC. It looked weird how it failed there, so instead of a brim, I am reprinting now with a tiny bit of support right near the base of the tail. Hoping that it holds it in place a little better. failed print: https://www.instagram.com/reel/ClKZ-mKgnYR/?utm_source=ig_web_copy_link
2022-11-20 00:24:12 +0000 UTCUgh! Love it! Looks great! I'll post some of the ones I print.
Drew Primo
2022-11-19 13:25:04 +0000 UTCi got some amazing prints in resin with the last axolotls that came out. Might do these in red and green sets
Andrew Gutierrez
2022-11-19 04:49:16 +0000 UTCThat tail is a real challenge.
2022-11-19 04:25:22 +0000 UTCno. i dont waste my time with etsy. too much competition, lots of under cutting, and too many fees. i only sell products locally or through my own website.
Olivier Sassine
2022-11-19 03:41:09 +0000 UTCi do use glue stick. I use textured PEI sheet and glue stick. my printers also print at 200mms. the issue i have is with the tail because it has such little surface area. i have had to use a brim to keep it sticking. i put 7 on a build plate and normally i get 1 failure on each print. with out a brim i cant even print 1 unless im printing at 50mms
Olivier Sassine
2022-11-19 03:39:33 +0000 UTCThere was one a few months ago with no Santa hat
2022-11-19 00:45:32 +0000 UTCI thought that this just came out
Roland Larocque
2022-11-19 00:40:57 +0000 UTCWow nice! Are you selling them on Etsy?
2022-11-19 00:32:58 +0000 UTCdo you use glue ? i print 20-40 of these a week every week 10 at a time with no issues .
William Hargraves
2022-11-19 00:12:57 +0000 UTCHooray !!! great idea if i do say so. hehehehehe . i only use 5% support cubic infill though prints way faster and is well and truly strong enough
William Hargraves
2022-11-19 00:11:38 +0000 UTCHow are the tails? It was so hard printing the original due to the tail being knocked loose (even with a brim).
Olivier Sassine
2022-11-18 23:21:27 +0000 UTCawwwwww
Fused Garage
2022-11-18 23:06:40 +0000 UTCAwesome! Thanks for the files, Hope the rest of 2022 treats you well!
TheNextDecade
2022-11-18 23:05:27 +0000 UTChave you got a sliced version of this as having some issues painting the gills
Ronnie Robinson
2022-11-18 23:04:48 +0000 UTC
