Finally Fixing My Forklift
Added 2024-03-04 03:33:28 +0000 UTCIt only took 9 months...
Comments
I have been watching some older WWW recently. Pretty interesting. I have an idea that you could include as a module in one of your more complicated repairs. The subject would be: How do you keep track of all the parts, nuts and bolts when you take things apart.? Honestly it is baffling that more small pieces are not lost. Just a thought.
Marshall
2024-03-13 02:54:43 +0000 UTCWe had a Yale like that. Had a 4 stage cylinder. That thing would lift like 18 feet high.
Watch Wes Work
2024-03-08 20:01:12 +0000 UTCYeah. You'll see it soon enough!
Watch Wes Work
2024-03-08 20:00:02 +0000 UTCI had the pleasure of rebuilding the lift cylinders on my Allis Chalmers ACC40 forklift. Its got a wacky try-cylinder setup where 3 cylinders are welded together. The inlet hose that feeds the whole system connects to the rod of the center cylinder, so fluid goes all the way to the bottom first (which is the top because cylinder is upside down), and then goes to the 2 cylinders which lift the carriage. There is a 4th cylinder that gets fluid last in line to lift the 3rd stage of the mast. I'm not a forklift expert, but I think its designed this way to allow for a short mast and a lot of free lift, almost 4 ft. Its an old NAVY machine that probably was used in tight spaces.
KEVIN KOSINSKI
2024-03-07 00:12:59 +0000 UTCI concur!
Marshall
2024-03-06 18:53:16 +0000 UTCWes, can we assume the SS Monte Carlo at the end is a teaser?
Daniel Peterson
2024-03-06 01:05:31 +0000 UTCNice projectβterrible cold! Cheers to powering through and getting things done. ππ»
Virtue Streams
2024-03-05 01:49:08 +0000 UTCIt's either a 1976 or 1977 Chevy El Camino SS.
Britt A Releford
2024-03-04 21:19:30 +0000 UTCGreat work as usual. We had that same storm in Iowa. I was in t-shirt at 10am and in a jacket by 3pm with shop heat back on.
Curtis Roberts
2024-03-04 18:35:25 +0000 UTCThe weather around here has been the same way, I'm smack dab in the middle of British Columbia, about a week ago we had plus 12Β°c, in one day it dropped to -6 and snowed 8 inches, it warmed up melted again dropped again and snowed 6 inches, our snow pack is 56% of normal, we're just starting March and unless someone changes really soon fire season will probably start in April or May this year.
Kowyn Hibbert (Warrior of the Rusty Wrench)
2024-03-04 18:21:56 +0000 UTCNicely done Wes! Thank you for the hydraulics diagrams, love it!
Matt Londergan
2024-03-04 18:07:35 +0000 UTCWill be interesting to see how that radiator comes out.
CapnMac82
2024-03-04 17:21:19 +0000 UTCIt's _el niΓ±o_ "spring" weather. Last Tuesday, when that polar front rolled through, we had sleet, which broke up 70 degree weather here in DFW. It's running about 10-15 degrees above 'normal' (but not out of line for start of _el niΓ±o_).
CapnMac82
2024-03-04 17:20:42 +0000 UTCOil leak, does that mean βself lubricating.β
Bill Scott
2024-03-04 14:06:19 +0000 UTCEven better! Thank you Mike
Bubba Hyde
2024-03-04 13:45:39 +0000 UTCYup! That looks like them. Thanks!
Bubba Hyde
2024-03-04 13:42:32 +0000 UTCyep, he posted the pick links on youtube, proper affiliate linky https://amzn.to/49zKhzb
mike forbes
2024-03-04 13:42:14 +0000 UTCGreat job Wes. Its going to be 78 degrees in S. Illinois today, Weird weather
dozerman53111
2024-03-04 13:40:05 +0000 UTCI think he has posted them before, they look like these sitting in my amazon cart , https://www.amazon.com/gp/product/B075NQHTKQ/ref=ox_sc_saved_image_5?smid=A2W86Q8280F2Q3&psc=1 I am sure he has a better affiliate liink.
mike forbes
2024-03-04 13:38:58 +0000 UTCwe have a leaky forklift too, well, it was a forklift that got scrapped out and the mast was repurposed to make an elevator in the machine shop, the chrome is way to roached to keep it from leaking so we did the only right thing and hoseclamped a tube and a strip of rubber to the cyl that leads back to the tank, like a case drain on a hydraulic motor, but much sketchier
Greg
2024-03-04 13:04:36 +0000 UTCYeah, it's been a crazy winter...I'm in upstate NY and haven't had to use my snowblower in 2 years. It's gonna be 63 degrees F today
Chris Freemesser
2024-03-04 12:26:59 +0000 UTCHey Wes, new Patreon member here. Love your videos, humor, and varied content. Yours is my βgo-toβ channel! Thanks for sharing these repairs with us.
@KanoeKing
2024-03-04 12:20:21 +0000 UTCThe Green Paper β€οΈπβ€οΈ
James Riordan
2024-03-04 11:52:45 +0000 UTCWhat are the little pry bars youβre using? Wonβt be offended if you drop an affiliate link. Thanks!
Bubba Hyde
2024-03-04 11:27:26 +0000 UTClove that car at the end mate, what is it, I'm from Australia
Steven Cox
2024-03-04 10:14:30 +0000 UTCLove the diagrams and explanation of the operation
Greg Quante
2024-03-04 07:44:36 +0000 UTC...also, the camera/film/sound quality was pretty good on this video. Your SpaceX level Green-Paper blue-print was a good learning experience too!. Thanks for things Wes. Hope you feel better.
Marshall
2024-03-04 05:50:20 +0000 UTC9 months you said...
Vadim
2024-03-04 04:50:49 +0000 UTCI'd like to know where you got that flat pick. Looks extremely useful....
Chris M
2024-03-04 04:15:59 +0000 UTCGreat drawings as usual! Based on how you explain it, i think the cushioning effect of the checkvalve/orifice makes a lot of sense- it makes the top half of the cylinder into a shock absorber, basically.. pushing against something with some resistance to change, rather than "air". Probably smooths things out and reduces jerkiness? I'd think it would work thoughout the range, not just at the end of travel, too.
Ι₯soΕΏ uΚop Ηpα΄sdβ© (ΚοΈΉΚ)
2024-03-04 04:10:19 +0000 UTCWeather forecast was right on. A couple of freezing days, then this Sunday was sunny and 75 in Rock Island.
Mark Rages
2024-03-04 04:07:52 +0000 UTCFinally got it house broken.
Kowyn Hibbert (Warrior of the Rusty Wrench)
2024-03-04 03:52:58 +0000 UTCPerseverance pays off
Arnold Boyd
2024-03-04 03:34:57 +0000 UTC
