Orca Slicer Neptune 4 Plus Profiles
Added 2023-11-20 14:02:23 +0000 UTCLINK to the Orca Neptune 4 Plus / 4 Max Profiles
https://drive.google.com/drive/folders/1_RLaNPzqsBaTaoS2w6QqkhREJhxeE4Gp?usp=sharing
Sorry for the delay on these. I was originally trying to speed up the print speeds and ended up overriding my settings. I've rolled things back and tried to simplify it. You should be able to run the same print settings for both the 4 Max & the 4 Plus vs needing different print profiles for both printers.
I'm still monkeying around with the print speeds as the profiles are pretty conservative compared to what was in Elegoo Cura but the prints should come out looking great and still print a good bit faster than your standard N3 neptune printer.
Also Ive included .3mf project files which someone mentioned might make it easier for importing the configurations. I have also included the .json files that you can IMPORT using the Orca > File >Import Config option in the slicer.
I'm also monkeying around with the K1 Max (semi driving me crazy) and will hopefully have something to share on that soon for any K1 Max owners.
I'm also working on a few Tasty Xmas Print files that I will be sharing soon.... mmm little debbie cakes
My Neptune 4 Plus video should be up today / tomorrow 🫠
PS Elegoo Giga Update - They only have a few limited prototypes currently and they are going to be sending it to another creator in the EU/APAC region. I will hopefully be getting my hands on one before the end of the year 🤞
Comments
Will have a go later, thanks
Anthony Whatley
2024-12-08 09:44:12 +0000 UTCHey. Try to open new project in Orca, put the .3mf files in it and it should import the UJ model (cube in my case) together with the settings. Then you can save the settings in the Orca and you should be good to go.
Danny Rooster
2024-12-08 09:38:33 +0000 UTCI just got a Neptune 4plus and this settings work incredible, I use the PETG profile and it’s perfect, thank you so much, I just open the square and save all settings and use that as a preset and that made the experience of Neptune 4 plus a great experience I bought it because I watch your videos, thank you :)
Gabriel Buitron
2024-12-06 16:41:59 +0000 UTCCan anyone explain how to upload these profiles to Orca please?
Anthony Whatley
2024-11-20 15:04:39 +0000 UTCI keep getting this error when trying to upload the json files using the import function, any ideas. How do I upload these. There are 0 configs imported. (Only non-system and compatible configs) Hint: Make sure you have added the corresponding printer before importing the configs.
Anthony Whatley
2024-11-08 14:53:14 +0000 UTChey man, do you have any for a 0.6 nozzle?
Alex Rickman
2024-06-01 05:55:35 +0000 UTCyeah, N4Pro PETG profile help plz :)
Dissyllabic
2024-03-16 22:09:19 +0000 UTCHello I am new to Orca Slicer, would I be able to use this profile for the N4Pro, or is there a way I can just keep the printing settings for Orca Slicers default N4Pro profile?
Luis Gonzalez
2024-03-15 00:54:47 +0000 UTCFor a N4Pro orca slicer profile ???
Stefan Cristian
2024-02-18 02:25:50 +0000 UTCI could not use Jessy's settings as the jerk was just way too high and causing layer shifting. I went back to the stock configuration files that Orca now has and everything is printing perfectly; albeit a bit slower. Now the issue could be where I have my N4M sitting; I have it on an industrial shelving unit and when she gets to shaking, the entire structure shakes. I may play with the settings in the future as I loved seeing how Jessy's settings were taking what used to be 3 day prints for me and reducing them to less than 1. The settings I am using now are still reducing print time (new machine with klipper) but to reduce even further would be great.
Jason Surber
2024-02-06 15:06:28 +0000 UTCI'm new to orca slicer and 3d printing in general, but how do import the profile?
Anderson Ledward
2024-02-04 05:57:06 +0000 UTCwhen will be getting the profiles for the 20 min benchy?
loserorangeboi
2024-01-01 02:07:10 +0000 UTCNeptune 4 pro profile soon ??
Golden Phoenix Cosplay
2023-12-24 00:28:25 +0000 UTCMine is stringing really bad. Is there an adjustment I can change to make it better?
Aj Pierce
2023-12-22 01:21:31 +0000 UTCI have the orcasliser with my Neptune 4 plus seem to be getting a lot of stringing is there a fix for that yet
Pete
2023-12-20 18:46:29 +0000 UTCdid a change ever get made to the profiles to decrease stringing?
Dane Geddes Buehre
2023-12-19 02:28:47 +0000 UTCHi! Total newbie here. I noticed in these profiles they are titled as having a .4 nozzle. Is a nozzle replacement necessary for these profiles to be used?
Chris Nicholson
2023-12-16 21:36:45 +0000 UTCWill this work for the Neptune 4 pro?
Garrick Stricklin
2023-12-15 17:57:22 +0000 UTCI get it that the n4 plus and max are neat and all, but I think that you could give some love to the n4 and n4p. I have an n4p and would really enjoy seeing an orca profile for her. And by the looks on the comments, I am not alone
Antonio Reinaldo
2023-12-12 16:02:31 +0000 UTCWill you release an orca slicer profile for Neptune 4 pro as well? Thank you!
3DPrintUniverse
2023-12-12 08:10:36 +0000 UTCJust got my N4Plus today and already printed the Bency straight from the included thumb drive. That thing is stupid fast! Nearly slung the printer off my table. The print turned out great though. I have installed your Orca profiles and they are working great so far.
Vann Chapman
2023-12-11 21:29:22 +0000 UTCHonestly I've learned a lot over the last week. I've had to pretty much learn to program at this point. I feel like I could program a Voron or a Ratrig at this time!! From what I can tell is there seems to be an issue with how the moonraker interface communicates with the Fluidd/ Klipper interface. It does appear that the newer FW updates may have fixed it but not 100% sure. There are some FW versions are not loading the Z-offset and bed meshes, and that the printer config file isn't set up to load the bed mesh at the right spot. I've used stuff from the Neptune Discord to help me create my own. I haven't had a chance to test it yet, I'm currently waiting on someone who knows more than me with this style of code to review my work.
Christopher Grace
2023-12-06 20:35:00 +0000 UTCI would be very happy if you could share what you learned.
Noel Tompos
2023-12-06 20:21:13 +0000 UTCI'm having issues with speed settings in Orca with my Neptune 3 Max. Did you share your profile for that printer yet or just the 4s?
Tofer Wescott
2023-12-01 01:50:29 +0000 UTCI've been looking into this since last night, and just looked through other profiles available. This seems to be more of an issue with missing line in the printer config file. I am currently teaching myself everything I can about it to try and work out a fix to share.
Christopher Grace
2023-11-30 21:07:25 +0000 UTCfunny enough, I was just looking at this myself. Im doing a but ton of research into this. It looks like there is one of two issues. I'm looking into both. One is either having to edit the printer config files to include the M420 and such, or editing the printer profile to match the config file. WOrking of figuring out which way is the correct way/ best way.
Christopher Grace
2023-11-30 20:49:28 +0000 UTCalso after doing some further looking. it doesnt call anything for the bed mesh....? am I missing something here?
Tony
2023-11-29 20:44:28 +0000 UTCHey, so I have been using your configs for orca slicer. I looked at the Gcode youre using for these after slicing. It is using some Marlin codes like M420 and M413. M420 isnt recognized by klipper and is supposed to run the bed mesh. Is this something that is pulling the wrong code for loading the bed mesh? and should we be replacing it with something else for klipper to pull the bed mesh?
Tony
2023-11-29 19:48:58 +0000 UTCWill you be doing a profile for PETG?
Salvador Moura
2023-11-29 14:02:23 +0000 UTCI got the Neptune 4 Plus a couple of weeks ago and have switched to Orca to use this profile. I've had great success with my Neptune 3 Max, but with the 4 Plus I keep having issues with the print adhesion. Maybe it is a speed issue? On my 3 Max it is never a problem and have never needed glue. With the 4 Plus I've been using glue and even a raft. Was printing a shoulder armor piece yesterday and it got about 95% completed and came off of the bed. Any suggestions?
Rick
2023-11-29 12:43:05 +0000 UTCIs there a simple instruction on loading the profile for orcaslicer, I cant seem to get it to work well without changing a bunch of other settings and havent found the info on youtube yet
Trent Ward
2023-11-28 20:38:01 +0000 UTCIam sorry to say it comes out very bad. Not working at all.
Ghali
2023-11-27 00:23:56 +0000 UTCAlso I'm not sure how to install this. Also I can't connect wireless to my printer yet, issues so when I export sliced file to SD card , do I just drop the 3mf from the end of the gcode or what.
3D Pathfinder
2023-11-23 14:12:36 +0000 UTCNice ! Thank you ! Can I use them in my N4P ? Just need to redefine the bed size right?
Kilad Dalik
2023-11-23 02:47:50 +0000 UTCany update to the profiles to get rid of the stringing?
Jason Myers
2023-11-22 17:51:16 +0000 UTCalso wondering this
Jim
2023-11-22 13:43:12 +0000 UTCAny chance we can see a petg profile? I keep struggling with that material.
Vaeron
2023-11-22 11:27:22 +0000 UTCIt will be awesome also a Orca profile for N4Pro and N3Max
Stefan Cristian
2023-11-21 20:17:41 +0000 UTCMine strings really bad with these profiles
Bignrich09
2023-11-21 00:10:36 +0000 UTChow do i imstall these on my orca slicer
Roberto Hernandez
2023-11-20 22:22:20 +0000 UTCFinally thank you!
Jackson S.
2023-11-20 19:18:36 +0000 UTCOK, I figured that might be it, just usually see 0.16, 0.20, etc.
Bryan B
2023-11-20 19:12:07 +0000 UTCi believe it is layer height. .2,.24,.28 mm
Jackson S.
2023-11-20 19:11:03 +0000 UTCDumb question, what are the measurements in reference to with the file names? 2mm, 24mm, 28mm?
Bryan B
2023-11-20 18:23:44 +0000 UTCAmazing, loading this up now! Are you planning on a Orca file for the Pro printer as well?
Golden Phoenix Cosplay
2023-11-20 15:37:06 +0000 UTC+1 to a N3P profile :D
Itai Rosenbaum
2023-11-20 15:05:11 +0000 UTCHow are you profiles different from the ones that come with the latest version of Orca?
Carsten Schmidt
2023-11-20 14:39:47 +0000 UTCMy max has been printing so slow is this a little bit faster? Took me 230 hours to do a helmet hoping I can have a few done before Christmas lol
Nik
2023-11-20 14:36:14 +0000 UTCheck yeah! I still regularly use my n3 plus and Max. Excited to get those built out. especially with the larger nozzles
Uncle Jessy
2023-11-20 14:32:07 +0000 UTCWhat about profiles for other Neptune printers? As in the 2?
Jeremy Davis
2023-11-20 14:25:36 +0000 UTCDumb question. Do you plan to post the Orca Profiles for Neptune 3 or 3 plus? Just downloaded Orca last night so I could give it a try.
R5duvy
2023-11-20 14:11:20 +0000 UTCNo, I rolled back to those from the 4 Max for now while I work on tweaking some of the settings for faster prints. And YES!! Hurry up with those nozzles
Uncle Jessy
2023-11-20 14:09:23 +0000 UTCLovely. Are these different from the ones posted earlier? Also -- still looking forward to running larger nozzles! Come on, Elegoo!
Jamie
2023-11-20 14:08:28 +0000 UTC
