![[New Files!] The Primaris Power Armor is here, exclusively on Patreon!](https://img5.samsuka.com/storage/12/rm/hn/c6f9d9-019e826c-be1b-71f1-91e3-207be8ae50d4.gif)
[New Files!] The Primaris Power Armor is here, exclusively on Patreon!
Added 2024-10-25 14:48:49 +0000 UTCMany of you have asked for it and it's finally finished! The largest set of armor we've made and our next large cosplay: the Primaris Space Marine Armor!
I initially didn't want to make this set due to the simple fact that you shouldn't fully 3D print an 8' tall armor set. It would be hazardous to wear, heavy, and you'd be very prone to injury in it. However, I knew we could do it responsibly and ethically if we tried something new: foam templates!
In a first for Galactic Armory we've included Pepakura Designer foam templates for all the large armor parts! There's already a huge wealth of tutorials on YouTube for foam cosplaying but we'll also be making our own set of this armor and making tutorials for you all along the way! Please note - the templates are halved since you can simply flip over the paper templates to get the opposite side.
Now as for the files themselves I've included 2 default scales: Astartes and Human. Astartes being the life sized 8+ feet tall monsters while the Human scale is for someone about 6' tall. Foam templates are included for both! The highly detailed patterns across the armor have been pre-separated to use in conjunction with a foam base. All files have also been pre-cut for smaller printers.
Lastly, we've included 2 different sets of chest insignia: Ultramarines and Generic Primaris. If you have any other chapter markings you'd like us to include be sure to recommend them in the comments and we could add them for future improvements! I expect this armor set to go through a few changes as we personally tackle this project ourselves and implement useful changes we envision along the way. That's one thing I think sets Galactic Armory apart from a lot of other designers - we actually make a lot of the costumes we design!
As these files age out of the monthly rewards at the end of November they will only be available for annual Patreon subs. I'm keeping the Space Marine helmets in the rewards an extra month for the contest but at the end of November those will also only be available for annual members!
Hope you all enjoy!
- Aaron
Comments
I have started to print out the 6ft sized armour of this, but i have to say your sizing is well off their is no way that this will fit a 6ft person its massive the parts are around %25 to large in my opinion, and the walls are way to thick on the models which adds a huge amount of filament use and weight to the parts i am printing these at %10 infill and that is still to much, I would add pictures to show what I mean but I cant on patreon, sadly I do find issues with most of the armour sets you make they are not correctly scaled for a average sized person.
adam
2024-11-23 10:58:03 +0000 UTCHow do I get this I just joined
Connor VanTil
2024-11-20 18:24:20 +0000 UTCI am so printing this for a static display thanks so much for doing it! Terminator next?
Ryan Yan
2024-11-18 00:01:12 +0000 UTCHi Aaron, I’d like to make a recommendation for a certain chest insignia using the Legion of the Damned chapter.
Ben Kohlman
2024-11-15 18:39:36 +0000 UTCSo far, I have printed one arm and am halfway through printing all the components for the leg armour. If you do go down this route, some of the pieces will need modifying. The finger armour is way too big to be practical and you will need to add a 'mini' pauldron to the inside of the main pauldron, so it sits on your shoulder. However, I am thoroughly enjoying the challenge.
Rob Clarke
2024-11-11 12:17:06 +0000 UTCHow do we download them?
Ben Diallo
2024-11-09 04:27:43 +0000 UTCNight lord crest
Ali Awadh
2024-10-31 08:01:47 +0000 UTCOn most of the templates they're overlapping but mostly on the edges of the templates.
TheMightyKingRex951
2024-10-31 00:50:15 +0000 UTCMine too lol. For the lion !!!!
Craig Tough
2024-10-29 03:54:30 +0000 UTCI’m interested bud. Would love to see what you have created and if you are willing to share I’d be extremely grateful.
Craig Tough
2024-10-29 03:53:36 +0000 UTCgot a sculpfun 11w S30 ultra (600x600). Cuts foam nicely.
Drew Thompson
2024-10-29 02:58:24 +0000 UTCbtw, you have a laser cutter or just planning to do it that way.
Well Armed Ogre
2024-10-29 02:08:15 +0000 UTCo7
Drew Thompson
2024-10-29 01:55:25 +0000 UTCDownload v2 I took care of the locked file problem
Aaron Hughes
2024-10-29 01:27:04 +0000 UTCBoth my pepakura and armorsmith are throwing 'locked file, cannot export to new format'. I can print to PDF, but inkscape is pulling that in as raster and doing a hackjob on tracing. I don't even want to talk about lightburn with it.....
Drew Thompson
2024-10-29 01:26:29 +0000 UTCOh yes there should be, I'll have to fix it tomorrow
Aaron Hughes
2024-10-29 01:26:06 +0000 UTCIs there no foam template for the shoulder pads they seem like a large base part of the armour to big to print?
Marble
2024-10-29 01:00:48 +0000 UTCSeriously… asking for my wife. I don’t get too many opportunities where she is in 100% agreement with this type of project- but the second you drop a terminator helmet, I believe I have free rein from here on out! 😃
Stashravens (Scott)
2024-10-29 00:59:24 +0000 UTCTerminator helmet/armor on Thursday?
Stashravens (Scott)
2024-10-29 00:57:36 +0000 UTCI would LOVE to see these!
Stashravens (Scott)
2024-10-29 00:56:20 +0000 UTCPepakura Designer will generate it with the paid for version. I have it for the silhouette back in the day
Well Armed Ogre
2024-10-29 00:35:21 +0000 UTCThe Specialist member link should be in the pinned post
Aaron Hughes
2024-10-28 18:21:28 +0000 UTCis it possible to print without the need for foam? for those of us that like to live on the edge x)
skull
2024-10-28 17:11:13 +0000 UTCI would like to see the templates in a DXF or SVG format. laser cutter for foam is much better for people like me who are fine with glue and cement, but less great with knives.....
Drew Thompson
2024-10-28 16:58:05 +0000 UTCHey just wondering Iam new and I don't know how to access the files
Logan Cummins
2024-10-28 07:04:27 +0000 UTCI think it might be under “pauldrons”
Fern
2024-10-27 19:51:37 +0000 UTCI know the Space Wolves have their special place in the fandom. But I do have a Viking cosplay with fur etc. I think a Space Wolves pattern would be sick!
Jan N.
2024-10-27 10:43:25 +0000 UTCso, been playing with the files since they are available, but I can't seem to find the pepakura model for the shoulders :( not sure if it's missing or just with a different name?
El_Pandalorian
2024-10-26 19:06:24 +0000 UTCAmazing! Thank you very much! Hopefully we'll get to see the other variants(light and heavy) as well!
Richard Borba
2024-10-26 13:16:46 +0000 UTCI think the generic chest imperialis is missing for the Human scale that isn't pre-cut for smaller printers
OrangeSockNinja
2024-10-26 07:17:18 +0000 UTCAm sorry am new where do I finde the armor ?
Roberto
2024-10-26 04:30:02 +0000 UTCBlood angels obviously
Connor
2024-10-26 02:51:53 +0000 UTCBadass!
Connor
2024-10-26 02:51:09 +0000 UTCBlack Templar insignia Please
J Mack
2024-10-26 02:08:12 +0000 UTCChest 5 file still not editable XXXX\Foam Templates V2\Astartes Scale\Chest\Chest 5
Yan Han
2024-10-26 01:44:19 +0000 UTCWas this made with a specific foam thickness in mind?
Christian megna
2024-10-26 00:20:34 +0000 UTCYea, Mom Son would love some Blood Angels stuff, have to rip out a Terminator too :)
Well Armed Ogre
2024-10-25 23:17:11 +0000 UTCWould love a Dark Angels shoulder logo. Already started printing!
Dan Thomas
2024-10-25 23:16:23 +0000 UTCThis is awesome 🤯🤯🤯
Will Maloy
2024-10-25 23:13:24 +0000 UTCdido
Oscar Blanco
2024-10-25 22:53:33 +0000 UTCSpace wolves would be nice to see
Cizin
2024-10-25 22:48:15 +0000 UTC28mm lol
Kevin Mcdonald
2024-10-25 22:36:16 +0000 UTCYaaaas! Bring us the deathwatch version and I will love you forever
Phil Monk
2024-10-25 22:30:12 +0000 UTCBlood Ravens chapter insignia please :D
George Morcos
2024-10-25 22:15:51 +0000 UTCAwesome stuff! Been waiting on something like this since a started printing cosplay armor. Some Grey Knight, Deathwatch and Blood Angels would be nice additions.
Super Dad
2024-10-25 21:17:58 +0000 UTCCan we get a 1/6 figure please
Mark Mulligan
2024-10-25 21:17:02 +0000 UTCI think Salamanders have such a unique flair they would be a good choice to have little edits. Dragon heads and scales would look great on the armor.
Evan Derrick
2024-10-25 21:12:23 +0000 UTCYou are all legends! And it is all ready in the printer. At the risk of sounding ungrateful is there other weapon options in the works like a power fist and hand flamer :D
Yma O Hyd Miniatures
2024-10-25 21:10:13 +0000 UTCWell now to Figure out an appropriately scaled mannequin so I can have a giant action figure.
James Bunker
2024-10-25 20:13:04 +0000 UTCJust ran the files through Bambu slicer and scaled up to about 105%, this should take about 25kg of filament to print. No worries!!
Rob Clarke
2024-10-25 19:39:24 +0000 UTCwhen is this available?
Astro for Dummies
2024-10-25 19:32:59 +0000 UTCDude thanks so much for this. Me and the wife were gonna make new space marine suits (I used to cosplay one a long time ago) and were trying to find the proper pepakura files but alot of our go to sites have been lost to the ages. With this we can rebuild hahaha. Now you just gotta get a mod option for the chaplains chest piece.
Brandon Williams
2024-10-25 19:22:56 +0000 UTCCheck V2, all pep files should be editable now
Aaron Hughes
2024-10-25 19:19:09 +0000 UTCWoooo! It's been a long time coming, you guys are the best in the business!
Zander Laird
2024-10-25 19:10:32 +0000 UTCWelp, guess I need to buy some foam now. This looks SICK!
rohan van eeden
2024-10-25 19:05:55 +0000 UTCSniff Sniff, I love you man!!! Sons gonna be stoked, hes been talking about this.
Well Armed Ogre
2024-10-25 18:37:47 +0000 UTCI’m not too used to pepakura but it says that the foam files are read only and wants a password otherwise. Kinda makes it hard to try and combine the pieces and make it easier to cut instead of all the small shapes. Is that just how the files are or is
noah kelly
2024-10-25 18:22:45 +0000 UTCPossibly!
Aaron Hughes
2024-10-25 18:11:46 +0000 UTCWill you also make the other versions in line with the other helmets? For example, that of the chaplain.
PlayCrate
2024-10-25 18:09:33 +0000 UTCdamn that is nice
filharvey
2024-10-25 18:00:22 +0000 UTCThis is going to be fun. ;)
wayne bakken
2024-10-25 17:57:50 +0000 UTCWould love to see the Raven guard raven skull crest for the chest armor!
JangoNova
2024-10-25 17:33:08 +0000 UTCLet's GOOO!
emiliano arauz
2024-10-25 17:32:30 +0000 UTCDeathwatch Pauldrons would be fire
Alex Falgione
2024-10-25 17:26:51 +0000 UTCI second the Deathwatch Pauldron request!
Alex Falgione
2024-10-25 17:24:55 +0000 UTCThe emperor protects
Frank Lombard
2024-10-25 16:54:03 +0000 UTCAwesome
Nick Smith
2024-10-25 16:52:58 +0000 UTCAwesomeeeeeee you guys rockkk
Scott Richards
2024-10-25 16:37:38 +0000 UTCOk this is cooler than I thought it was gonna be. I h e a friend who has worked with foam so I’d have to employ her help on it!
Robert Noon
2024-10-25 16:23:18 +0000 UTCI would desperately love to see Deathwatch Pauldrons added.
Rob Clarke
2024-10-25 16:20:27 +0000 UTCso is it downloadable right now or do we have to wait till the end of november?
King War Õkami
2024-10-25 16:09:07 +0000 UTCBlood angels, heck Dante specifically. Like come on. Death masks? Nipple armor? Need I say more.
Adam Beck
2024-10-25 16:08:33 +0000 UTCIf it's doable down the road a space wolf chest piece would be epic
Capt_Ahab
2024-10-25 16:06:59 +0000 UTCThe Tome Keepers join the fight! Hopefully we get a bulwark shield pattern too, gotta block those damn xenos
OrangeSockNinja
2024-10-25 16:04:45 +0000 UTCIf you’re interested. I have made and 3-D printed purity seal, molds and stamps, if you want to connect, I would love to share what I have and I can show you some pictures of ones that I have finished.
Compendium Ordo Cosplay
2024-10-25 15:45:20 +0000 UTCI absolutely cannot wait to get started on this. I would definitely like to request a Chaplin variant of the armor. Which, if I’m not mistaken, also covers the style of armor for the bulwark So it’s kind of a two in one.
Compendium Ordo Cosplay
2024-10-25 15:43:21 +0000 UTCuh oh
Spartan 052
2024-10-25 15:39:33 +0000 UTCAs a long time 40k fan and a new patron I’m super excited. I’ve never made prop armor before or worked with foam, not really sure where to start but excited for the challenge.
Josh Miller
2024-10-25 15:35:52 +0000 UTCSo some portions are supposed to be printed and some cut from foam ?
Joshua de La Torre
2024-10-25 15:34:37 +0000 UTCWhaaaa, super sick! Hope the bulward is gonna be in here too
Jojojoppie
2024-10-25 15:29:24 +0000 UTCFor the Angel!
Oblerone
2024-10-25 15:27:06 +0000 UTCA deathwatch shoulder would be awesome
Jesse P
2024-10-25 15:25:59 +0000 UTCBlood Angels please! Since I'm already working on a blood angels chaplain conversion helmet
Austin Coppedge
2024-10-25 15:24:22 +0000 UTCI'm super excited for this! Thank you so much for making this! Is there any chance we might see Chaplain iconography for this set?
Garviel L.
2024-10-25 15:21:58 +0000 UTCWe'll be making tutorials!
Aaron Hughes
2024-10-25 15:19:37 +0000 UTCSweet!
Tristan
2024-10-25 15:18:10 +0000 UTCBY THE GOLDEN THRONE! Amazing work my dudes! 🔥👏
Drew Rodgers
2024-10-25 15:16:08 +0000 UTCAnother vote for the Vlka Fenryka!
Choque
2024-10-25 15:15:27 +0000 UTCMaybe a couple!
Aaron Hughes
2024-10-25 15:14:09 +0000 UTCCan never have too long a backlog ;)
Aaron Hughes
2024-10-25 15:13:58 +0000 UTCInstantly DOWNLOADED!!
Dillon Caudell
2024-10-25 15:13:41 +0000 UTCMy second favorite legion!
Aaron Hughes
2024-10-25 15:13:23 +0000 UTCOh yeah definitely want to make some purity seal molds!
Aaron Hughes
2024-10-25 15:13:03 +0000 UTCWouah ! Imperial fist, for the yellow boyz
Théo KOLERA
2024-10-25 15:12:46 +0000 UTCYes I want to do those as attachments to the base shoulders!
Aaron Hughes
2024-10-25 15:12:34 +0000 UTCMy boys!
Aaron Hughes
2024-10-25 15:12:17 +0000 UTCMight do something like that, although it'll probably be very minor scaling differences
Aaron Hughes
2024-10-25 15:12:06 +0000 UTCIt's where I got my start as well! About time I get back to it
Aaron Hughes
2024-10-25 15:11:00 +0000 UTCCan't thank you enough! I bet a lot of us were foamsmiths before we started 3D printed so this is so perfect, especially releasing the full set all at once. Great job, very thoughtful and generous.
Laura Pinckley
2024-10-25 15:08:01 +0000 UTCSomething I have seen from other foam pepakura designers is pre-scaled options for different size people, say 5'8", 6', and 6'4". I was just preparing to laser cut alphonse elric armor, but this armor might take precedence!
Christian megna
2024-10-25 15:07:21 +0000 UTCWell if you would do blood angels Iconography, I'd be keen to add that to my collection.
Oblerone
2024-10-25 15:06:39 +0000 UTCThis is incredible! You guys do insane work! It would be really cool to see some of the highly detailed pauldrons from SM2.
Colton Estep
2024-10-25 15:05:10 +0000 UTCI would just like to point out that if any traitor legion had Primaris Marines it would most certainly be The Alpha Legion.
Alpharius570
2024-10-25 15:04:48 +0000 UTCThis Is why I love you guys, and the reason why you take my money 🤣 would love to see something from the salamanders and what about purity seals!?
El_Pandalorian
2024-10-25 15:04:19 +0000 UTCId love to see Dark angels or Death Watch but wow what a set and I was hoping to make one of these but didn’t know where to start. Looks like I know now 😁😁
Craig Tough
2024-10-25 15:04:07 +0000 UTCLETS GOOOO Thank you guys ❤️ Agreed with others some space wolf patterns would be incredible!
AKApacman
2024-10-25 15:02:51 +0000 UTCSPACE WOLVES MENTIONED RRAAAGGGHHH 🦅
AKApacman
2024-10-25 15:02:11 +0000 UTCSuper fantastic amazing! Dark Angels would be great!
Jesse P
2024-10-25 15:01:51 +0000 UTCwould like to recommend the Space Wolves chapter, as always, fantastic work for the empire of mankind, you, our trusted armorers, as well as the Emperor, protects!
ArcaneWolf
2024-10-25 15:00:15 +0000 UTCdefinetely need to add some death watch and space wolves
skull
2024-10-25 14:59:26 +0000 UTCI really want to know how someone would wear this/apply it to clothing to wear
Colton Ream
2024-10-25 14:59:18 +0000 UTCAbsolutely amazing. Awesome work
Anton Ride
2024-10-25 14:58:31 +0000 UTCHoly throne! That's incredible!
Cal Brown
2024-10-25 14:58:12 +0000 UTCBLACK TEMPLARS FOR THE EMPEROR
Norman Barud
2024-10-25 14:53:09 +0000 UTCEmperor protects
Gabriel Caudillo
2024-10-25 14:53:06 +0000 UTCThat's two releases this months for full cosplays I'm planning to build. No more til 2026 please 🤣
Adam
2024-10-25 14:52:39 +0000 UTCWoah! Blown away!
Christian Torresdey
2024-10-25 14:51:32 +0000 UTCAwesome! Would love to see some blood angels markings, and are there plans for the other custom bolt pistol and bolt rifles?
Tristan
2024-10-25 14:51:22 +0000 UTCOMFG!!!! This looks amazing 🔥🔥🔥🔥🔥🔥
Johnpaul
2024-10-25 14:50:36 +0000 UTC
