Welcome Pack Updated - Again!
Added 2020-03-31 04:47:53 +0000 UTCHello everyone!
The tempest is coming, might as well get started on your officers ;)
100% pre-supported and tested for resin printing.
-
New link:
https://www.comicsgamesandthings.com/packs/campaign/makers-cult/8
See you all on the 4th for part 1!
-Garin
Comments
Hello, to download from our platform, you need to first create your account. All the instructions are in the welcome email they was sent to you when you subscribed
The Makers Cult
2022-03-04 17:36:52 +0000 UTCI open the link but there doesn't seem to be a download link?
Benjamin Loos
2022-03-04 17:21:15 +0000 UTCThanks.
Michael Rosekelly
2021-08-08 19:18:54 +0000 UTCSorry for the confusion. We often don't include symmetrical parts to stave space, so when something is marked with "Right" it will usually need a "left". All resin slicer programs (As far as I know) Have a mirror function. Select the right side, mirror it and you have a left.
The Makers Cult
2021-08-08 19:13:43 +0000 UTCDon't know if I'm just being stupid and overlooking something or is the landspeeder folder missing the file for the right side of the body?
Michael Rosekelly
2021-08-08 19:05:29 +0000 UTCHI, I do all my test prints at 50, but the pre supports should work either way.
The Makers Cult
2021-06-09 23:31:36 +0000 UTCFor the presupported models, what is the expected layer height they were supported under? 50um or 35um?
Joseph Lenox
2021-06-09 22:52:20 +0000 UTCHello. The models in this pack are on the small side so there's no real need to hollow them. If you are using a FDM printer I would recommend the Fat Dragon Games miniature profile. https://www.fatdragongames.com/fdgfiles/?p=5093
The Makers Cult
2021-05-20 13:43:07 +0000 UTCIs there any readme or something on how to print them? How much filling etc?
Yeah Right
2021-05-20 08:54:39 +0000 UTCHowdy, I was if the chaplain would be supported? I've downloaded the file standalone and as a group and it doesn't seem to come with supported files. Thanks for the sick models and the read!
Capsized
2021-02-01 08:13:41 +0000 UTCtrying to get the welcome pack, its just pictures, no stls.... edit: restarted the google drive. works now.
Brady Inman
2020-11-06 12:42:58 +0000 UTCGolden Papa printed amazingly! I have had a lot of trouble with the Chaplin, attempting to print him but after 2 tries I think I need to redo the supports [The only make the raft and then end up pulling my build plate off, probably due to suction so I am switching to skate for the foot of supports] Anyone else resin print a Chaplin yet?
Sean Abel
2020-08-16 20:23:42 +0000 UTCplease update the welcome package and make support. The welcome package is the face of the group it should be perfect.Thanks.
Vladislav
2020-06-28 08:49:52 +0000 UTCPersonally I printed them jet up-ball down. Are you using resin or FDM?
The Makers Cult
2020-06-12 11:59:44 +0000 UTCAnyone else have problems with the assault skimmer small jets, tried 4 different ways now... The rest prints fine!
Clive McThorg
2020-06-11 21:50:53 +0000 UTC
