How to build a dog house! My first experience 6
Added 2022-11-02 07:31:09 +0000 UTCThe booth manufacturing process continues. I am making a frankly crooked roof, but so far this is only a draft version.
First, a frame is made according to the size of the booth from above (Pic 1). The roof will be removable. For a frame 80x190cm, bars 70 cm long came up, they are superimposed on each other in the form of a triangle and fastened with a corner, I needed to make three of these, two of them - the beginning and end and one more divides the roof into two parts (not equal) , since I will make a hatch in the part where the booth is closed. This detail will help to tidy up inside without removing the entire roof (Pics 2,3,4). In order for the bars to lie on the base as evenly as possible, you need to make triangular cutouts as evenly as possible (not my case lol) (Pic 5). You can start sheathing the roof frame, I use again OSB-3 panels for this, cut to size. Everything is simple here - apply sheets to size and attach with self-tapping screws, rectangular and triangular, for the hatch you need to use furniture hinges. (Pics 6,7,8). Roof draft is ready! (Pic 9)
