Roller Toolkit

Hey Miniature Makers!

We had a good idea of the tools we wanted, but we also spoke with the community and included all of the tools that they requested. Everything is made to print in both FDM and in Resin so all you have to do is hit that shiny print button.

You do not need to print all of these tools, but they are there to make your Print 'n' Roll life easier should you so choose.

I will break down what you get, and what each bit is for below:

Base Cutters:

We have made base cutters for every miniature base that we know of, ranging from 20cm square to 160x100cm oval and including multi-hex TTRPG bases.

These are for cutting the bases out of clay for your miniatures. When used on clay rolled over with the Print 'n' Roll set you will get amazing quality textured bases with very little work.

We have included every base size that we use but if you use some that we have not made the cutters for, let us know and we will make them and add them to the pack for everyone!

Rolling Pins:

These are as you would imagine, we have included a 4" and 6" pin so you can print it on any size of printer.

Handles:

The handles are for connecting to any of the rollers including the rolling pins and allow for better grip and movement of the rollers. There are a few different sizes so that you can print ones that connect 0.5" and 1" rollers to larger rollers so you can roll out multi-pattern textures at once. An example of this would be a wooden floor with a tile edge.

Pressure Moderators:

These work in a very similar way to handles, but have a edge that connects to the end of the rollers so that you can see how deep the edge is pressing into the substance you are rolling on, to ensure you are applying even pressure.

Spacers:

There are a range of spacer sizes from 0.25cm up to 2cm. This refers to the distance the spacers stand out from the roller. You use them by connecting them to the rollers using a handle or pressure moderator and they ensure that the clay that you roll out is the exact thickness you require. The one is use most is the 0.325cm spacer which so happens to be the exact depth of most miniature bases.

Connection Rods:

The connection rods are used to connect two or more rollers together. This can be used with the rolling pins to make longer ones or to connect two textured rollers together. The Ground texture rollers in the Print 'n' Roll sets will always be made so that the edges of the rollers can be connected with the pattern continuing seamlessly.

Base Topper Cutters:

The topper cutters are just like the base cutters but they are smaller so that they can be used to cut textured smaller shapes to apply to the top of other bases. Therefore, if you have a set of black plastic 32mm bases for example, you can use these to quickly make the textures to go on top.

Tile Cutters and Grid Presses:

These are for the TTRPG players among you. There is a 4" square cutter and a hex shaped cutter so that you call roll out the clay and cut a perfect tile. There are then the grid presses that press down on top to create a prefect square or hex grid made to the TTRPG standard sizes.